12.7: Types of Crystalline Solids- Molecular, Ionic, and Atomic

CHEM 114: Introductory Chemistry · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    12.7: Types of Crystalline Solids- Molecular, Ionic, and Atomic

    Chapter 1
    1. Chapter 1: The Chemical World
    2. 1.1: The Scope of Chemistry
    3. 1.2: Chemicals Compose Ordinary Things
    4. 1.3: Hypothesis, Theories, and Laws
    5. 1.4: The Scientific Method: How Chemists Think
    6. 1.5: A Beginning Chemist: How to Succeed
     •  Chapter 2
    1. Chapter 2: Measurement and Problem Solving
    2. 2.1: Taking Measurements
    3. 2.2: Scientific Notation: Writing Large and Small Numbers
    4. 2.3: Significant Figures: Writing Numbers to Reflect Precision
    5. 2.4: Significant Figures in Calculations
    6. 2.5: The Basic Units of Measurement
    7. 2.6: Problem Solving and Unit Conversions
    8. 2.7: Solving Multistep Conversion Problems
    9. 2.8: Units Raised to a Power
    10. 2.9: Density
    11. 2.10: Numerical Problem-Solving Strategies and the Solution Map
    12. 2.E: Measurement and Problem Solving (Exercises)
     •  Chapter 3
    1. Chapter 3: Matter and Energy
    2. 3.1: In Your Room
    3. 3.2: What is Matter?
    4. 3.3: Classifying Matter According to Its State: Solid, Liquid, and Gas
    5. 3.4: Classifying Matter According to Its Composition
    6. 3.5: Differences in Matter: Physical and Chemical Properties
    7. 3.6: Changes in Matter: Physical and Chemical Changes
    8. 3.7: Conservation of Mass: There is No New Matter
    9. 3.8: Energy
    10. 3.9: Energy and Chemical and Physical Change
    11. 3.10: Temperature: Random Motion of Molecules and Atoms
    12. 3.11: Temperature Changes: Heat Capacity
    13. 3.12: Energy and Heat Capacity Calculations
    14. 3.E: Exercises
     •  Chapter 4
    1. Chapter 4: Atoms and Elements
    2. 4.1: Experiencing Atoms at Tiburon
    3. 4.2: Indivisible: The Atomic Theory
    4. 4.3: The Nuclear Atom
    5. 4.4: The Properties of Protons, Neutrons, and Electrons
    6. 4.5: Elements: Defined by Their Numbers of Protons
    7. 4.6: Looking for Patterns: The Periodic Law and the Periodic Table
    8. 4.7: Ions: Losing and Gaining Electrons
    9. 4.8: Isotopes: When the Number of Neutrons Varies
    10. 4.9: Atomic Mass: The Average Mass of an Element’s Atoms
      •  Chapter 5
    1. Chapter 5: Molecules and Compounds
    2. 5.1: Sugar and Salt
    3. 5.2: Compounds Display Constant Composition
    4. 5.3: Chemical Formulas: How to Represent Compounds
    5. 5.4: A Molecular View of Elements and Compounds
    6. 5.5: Writing Formulas for Ionic Compounds
    7. 5.6: Nomenclature: Naming Compounds
    8. 5.7: Naming Ionic Compounds
    9. 5.8: Naming Molecular Compounds
    10. 5.9: Naming Acids
    11. 5.10: Nomenclature Summary
    12. 5.11: Formula Mass: The Mass of a Molecule or Formula Unit
      •  Chapter 6
    1. Chapter 6: Chemical Composition
    2. 6.1: How Much Sodium?
    3. 6.2: Counting Nails by the Pound
    4. 6.3: Counting Atoms by the Gram
    5. 6.4: Counting Molecules by the Gram
    6. 6.5: Chemical Formulas as Conversion Factors
    7. 6.6: Mass Percent Composition of Compounds
    8. 6.7: Mass Percent Composition from a Chemical Formula
    9. 6.8: Calculating Empirical Formulas for Compounds
    10. 6.9: Calculating Molecular Formulas for Compounds
      •  Chapter 7
    1. Chapter 7: Chemical Reactions
    2. 7.1: Grade School Volcanoes, Automobiles, and Laundry Detergents
    3. 7.2: Evidence of a Chemical Reaction
    4. 7.3: The Chemical Equation
    5. 7.4: How to Write Balanced Chemical Equations
    6. 7.5: Aqueous Solutions and Solubility: Compounds Dissolved in Water
    7. 7.6: Precipitation Reactions: Reactions in Aqueous Solution That Form a Solid
    8. 7.7: Writing Chemical Equations for Reactions in Solution: Molecular, Complete Ionic, and Net Ionic Equations
    9. 7.8: Acid–Base and Gas Evolution Reactions
    10. 7.9: Oxidation–Reduction Reactions
    11. 7.10: Classifying Chemical Reactions
    12. 7.11: The Activity Series
     •  Chapter 8
    1. Chapter 8: Quantities in Chemical Reactions
    2. 8.1: Climate Change: Too Much Carbon Dioxide
    3. 8.2: Stoichiometry
    4. 8.3: Making Molecules: Mole-to-Mole Conversions
    5. 8.4: Making Molecules: Mass-to-Mass Conversions
    6. 8.5: Limiting Reactant, Theoretical Yield, and Percent Yield
    7. 8.6: Limiting Reactant, Theoretical Yield, and Percent Yield from Initial Masses of Reactants
    8. 8.7: Enthalpy: A Measure of the Heat Evolved or Absorbed in a Reaction
    Chapter 9
    1. Chapter 9: Electrons in Atoms and the Periodic Table
    2. 9.1: Blimps, Balloons, and Models of the Atom
    3. 9.2: Light: Electromagnetic Radiation
    4. 9.3: The Electromagnetic Spectrum
    5. 9.4: The Bohr Model: Atoms with Orbits
    6. 9.5: The Quantum-Mechanical Model: Atoms with Orbitals
    7. 9.6: Quantum-Mechanical Orbitals and Electron Configurations
    8. 9.7: Electron Configurations and the Periodic Table
    9. 9.8: The Explanatory Power of the Quantum-Mechanical Model
    10. 9.9: Periodic Trends: Atomic Size, Ionization Energy, and Metallic Character
     •  Chapter 10
    1. Chapter 10: Chemical Bonding
    2. 10.1: Bonding Models and AIDS Drugs
    3. 10.2: Representing Valence Electrons with Dots
    4. 10.3: Lewis Structures of Ionic Compounds: Electrons Transferred
    5. 10.4: Covalent Lewis Structures: Electrons Shared
    6. 10.5: Writing Lewis Structures for Covalent Compounds
    7. 10.6: Resonance: Equivalent Lewis Structures for the Same Molecule
    8. 10.7: Predicting the Shapes of Molecules
    9. 10.8: Electronegativity and Polarity: Why Oil and Water Don’t Mix
     •  Chapter 11
    1. Chapter 11: Gases
    2. 11.1: Extra-Long Straws
    3. 11.2: Kinetic Molecular Theory: A Model for Gases
    4. 11.3: Pressure: The Result of Constant Molecular Collisions
    5. 11.4: Boyle’s Law: Pressure and Volume
    6. 11.5: Charles’s Law: Volume and Temperature
    7. 11.6: Gay-Lussac's Law: Temperature and Pressure
    8. 11.7: The Combined Gas Law: Pressure, Volume, and Temperature
    9. 11.8: Avogadro’s Law: Volume and Moles
    10. 11.9: The Ideal Gas Law: Pressure, Volume, Temperature, and Moles
    11. 11.10: Mixtures of Gases: Why Deep-Sea Divers Breathe a Mixture of Helium and Oxygen
    12. 11.11: Gases in Chemical Reactions
     •  Chapter 12
    1. Chapter 12: Liquids, Solids, and Intermolecular Forces
    2. 12.1: Interactions between Molecules
    3. 12.2: Properties of Liquids and Solids
    4. 12.3: Intermolecular Forces in Action: Surface Tension and Viscosity
    5. 12.4: Evaporation and Condensation
    6. 12.5: Melting, Freezing, and Sublimation
    7. 12.6: Types of Intermolecular Forces: Dispersion, Dipole–Dipole, Hydrogen Bonding, and Ion-Dipole
    8. 12.7: Types of Crystalline Solids: Molecular, Ionic, and Atomic
    9. 12.8: Water: A Remarkable Molecule
     •  Chapter 13
    1. Chapter 13: Solutions
    2. 13.1: Prelude - Tragedy in Cameroon
    3. 13.2: Solutions: Homogeneous Mixtures
    4. 13.3: Solutions of Solids Dissolved in Water: How to Make Rock Candy
    5. 13.4: Solutions of Gases in Water: How Soda Pop Gets Its Fizz
    6. 13.5: Solution Concentration: Mass Percent
    7. 13.6: Solution Concentration: Molarity
    8. 13.7: Solution Dilution
    9. 13.8: Solution Stoichiometry
    10. 13.9: Freezing Point Depression and Boiling Point Elevation: Making Water Freeze Colder and Boil Hotter
    11. 13.10: Osmosis: Why Drinking Salt Water Causes Dehydration
      •  Chapter 14
    1. Chapter 14: Acids and Bases
    2. 14.1: Sour Patch Kids and International Spy Movies
    3. 14.2: Acids: Properties and Examples
    4. 14.3: Bases: Properties and Examples
    5. 14.4: Molecular Definitions of Acids and Bases
    6. 14.5: Reactions of Acids and Bases
    7. 14.6: Acid–Base Titration: A Way to Quantify the Amount of Acid or Base in a Solution
    8. 14.7: Strong and Weak Acids and Bases
    9. 14.8: Water: Acid and Base in One
    10. 14.9: The pH and pOH Scales: Ways to Express Acidity and Basicity
    11. 14.10: Buffers: Solutions That Resist pH Change
     

    Template:HideTOC

    Learning Objectives
    • Identify different types of solid substances.

    As a society, we sometimes take things for granted. For example, it is often assumed that we will get electric power when we connect a plug to an electrical outlet. The wire that comprises that outlet is almost always copper, a material that conducts electricity well. The unique properties of the solid copper allow electrons to flow freely through the wire and into whatever device we connect it to. Then we can enjoy music, television, computer work, or whatever other activity we want to undertake. However, these activities—and the miracle of electricity itself—would not be possible without that copper wire!

    Classes of Crystalline Solids

    Crystalline substances can be described by the types of particles in them and the types of chemical bonding that take place between the particles. There are four types of crystals: (1) ionic, (2) metallic, (3) covalent network, and (4) molecular. Properties and several examples of each type are listed in the following table and are described in the table below.

    Type of Crystalline Solid Examples (formulas) Melting Point (°C) Normal Boiling Point (°C)
    Table \(\PageIndex{1}\): Crystalline Solids: Melting and Boiling Points
    Ionic \(\ce{NaCl}\) 801 1413
    \(\ce{CaF_2}\) 1418 1533
    Metallic \(\ce{Hg}\) -39 630
    \(\ce{Na}\) 371 883
    \(\ce{Au}\) 1064 2856
    \(\ce{W}\) 3410 5660
    Covalent Network \(\ce{B}\) 2076 3927
    \(\ce{C}\) (diamond) 3500 3930
    \(\ce{SiO_2}\) 1600 2230
    Molecular \(\ce{H_2}\) -259 -253
    \(\ce{I_2}\) 114 184
    \(\ce{NH_3}\) -78 -33
    \(\ce{H_2O}\) 0 100

    Ionic crystals - The ionic crystal structure consists of alternating positively-charged cations and negatively-charged anions (see figure below). The ions may either be monatomic or polyatomic. Generally, ionic crystals form from a combination of Group 1 or 2 metals and Group 16 or 17 nonmetals or nonmetallic polyatomic ions. Ionic crystals are hard and brittle and have high melting points. Ionic compounds do not conduct electricity as solids, but do conduct electricity when molten or in aqueous solution.

    3D representation of a lattice structure with green and blue spheres interconnected by lines, forming a cubic arrangement.
    Figure \(\PageIndex{1}\): \(\ce{NaCl}\) crystal.

    Metallic crystal - Metallic crystals consist of metal cations surrounded by a "sea" of mobile valence electrons (see figure below). These electrons, also referred to as delocalized electrons, do not belong to any one atom, but are capable of moving through the entire crystal. As a result, metals are good conductors of electricity. As seen in the table above, the melting points of metallic crystals span a wide range.

    Diagram illustrating delocalized electrons around metal ions, with arrows highlighting their connections.
    Figure \(\PageIndex{2}\): Metallic crystal lattice with free electrons able to move among positive metal atoms.

    Covalent network crystals - A covalent network crystal consists of atoms at the lattice points of the crystal, with each atom being covalently bonded to its nearest neighbor atoms (see figure below). The covalently bonded network is three-dimensional and contains a very large number of atoms. Network solids include diamond, quartz, many metalloids, and oxides of transition metals and metalloids. Network solids are hard and brittle, with extremely high melting and boiling points. Being composed of atoms rather than ions, they do not conduct electricity in any state.

    3D molecular structure with purple and silver spheres representing atoms, arranged in a cubic lattice formation.
    Figure \(\PageIndex{3}\): Diamond is a network solid and consists of carbon atoms covalently bonded to one another in a repeating three-dimensional pattern. Each carbon atom makes for single covalent bonds in a tetrahedral geometry.

    Molecular crystals - Molecular crystals typically consist of molecules at the lattice points of the crystal, held together by relatively weak intermolecular forces (see figure below). The intermolecular forces may be dispersion forces in the case of nonpolar crystals, or dipole-dipole forces in the case of polar crystals. Some molecular crystals, such as ice, have molecules held together by hydrogen bonds. When one of the noble gases is cooled and solidified, the lattice points are individual atoms rather than molecules. In all cases, the intermolecular forces holding the particles together are far weaker than either ionic or covalent bonds. As a result, the melting and boiling points of molecular crystals are much lower. Lacking ions or free electrons, molecular crystals are poor electrical conductors.

    3D molecular structure with interconnected red and blue atoms, enclosed within a dashed cube outline.
    Figure \(\PageIndex{4}\): Ice crystal structure.

    Some general properties of the four major classes of solids are summarized in Table \(\PageIndex{2}\).

    Table \(\PageIndex{2}\): Properties of the Major Classes of Solids
    Ionic Solids Molecular Solids Covalent Solids Metallic Solids
    *Many exceptions exist. For example, graphite has a relatively high electrical conductivity within the carbon planes, and diamond has the highest thermal conductivity of any known substance.
    poor conductors of heat and electricity poor conductors of heat and electricity poor conductors of heat and electricity* good conductors of heat and electricity
    relatively high melting point low melting point high melting point melting points depend strongly on electron configuration
    hard but brittle; shatter under stress soft very hard and brittle easily deformed under stress; ductile and malleable
    relatively dense low density low density usually high density
    dull surface dull surface dull surface lustrous
    Example \(\PageIndex{1}\)

    Classify \(\ce{Ge}\), \(\ce{RbI}\), \(\ce{C6(CH3)6}\), and \(\ce{Zn}\) as ionic, molecular, covalent, or metallic solids and arrange them in order of increasing melting points.

    Given: compounds

    Asked for: classification and order of melting points

    Strategy:

    1. Locate the component element(s) in the periodic table. Based on their positions, predict whether each solid is ionic, molecular, covalent, or metallic.
    2. Arrange the solids in order of increasing melting points based on your classification, beginning with molecular solids.

    Solution:

    A. Germanium lies in the p block just under Si, along the diagonal line of semi-metallic elements, which suggests that elemental Ge is likely to have the same structure as Si (the diamond structure). Thus Ge is probably a covalent solid.

    RbI contains a metal from group 1 and a nonmetal from group 17, so it is an ionic solid containing Rb+ and I− ions.

    The compound \(\ce{C6(CH3)6}\) is a hydrocarbon (hexamethylbenzene), which consists of isolated molecules that stack to form a molecular solid with no covalent bonds between them.

    Zn is a d-block element, so it is a metallic solid.

    B. Arranging these substances in order of increasing melting points is straightforward, with one exception. We expect C6(CH3)6 to have the lowest melting point and Ge to have the highest melting point, with RbI somewhere in between. The melting points of metals, however, are difficult to predict based on the models presented thus far. Because Zn has a filled valence shell, it should not have a particularly high melting point, so a reasonable guess is

    \[\ce{C6(CH3)6 < Zn < RbI < Ge.} \nonumber\]

    The actual melting points are C6(CH3)6, 166°C; Zn, 419°C; RbI, 642°C; and Ge, 938°C. This agrees with our prediction.

    Exercise \(\PageIndex{1}\)

    Classify CO2, BaBr2, GaAs, and AgZn as ionic, covalent, molecular, or metallic solids and then arrange them in order of increasing melting points.

    Answer

    CO2 (molecular) < AgZn (metallic) ~ BaBr2 (ionic) < GaAs (covalent).

    The actual melting points are: CO2, about -15.6°C; AgZn, about 700°C; BaBr2, 856°C; and GaAs, 1238°C.

    Summary

    • Ionic crystals are composed of alternating positive and negative ions.
    • Metallic crystals consist of metal cations surrounded by a "sea" of mobile valence electrons.
    • Covalent crystals are composed of atoms which are covalently bonded to one another.
    • Molecular crystals are held together by weak intermolecular forces.

    12.7: Types of Crystalline Solids- Molecular, Ionic, and Atomic is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by LibreTexts.