7.11: The Activity Series

CHEM 114: Introductory Chemistry · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.11: The Activity Series

    Chapter 1
    1. Chapter 1: The Chemical World
    2. 1.1: The Scope of Chemistry
    3. 1.2: Chemicals Compose Ordinary Things
    4. 1.3: Hypothesis, Theories, and Laws
    5. 1.4: The Scientific Method: How Chemists Think
    6. 1.5: A Beginning Chemist: How to Succeed
     •  Chapter 2
    1. Chapter 2: Measurement and Problem Solving
    2. 2.1: Taking Measurements
    3. 2.2: Scientific Notation: Writing Large and Small Numbers
    4. 2.3: Significant Figures: Writing Numbers to Reflect Precision
    5. 2.4: Significant Figures in Calculations
    6. 2.5: The Basic Units of Measurement
    7. 2.6: Problem Solving and Unit Conversions
    8. 2.7: Solving Multistep Conversion Problems
    9. 2.8: Units Raised to a Power
    10. 2.9: Density
    11. 2.10: Numerical Problem-Solving Strategies and the Solution Map
    12. 2.E: Measurement and Problem Solving (Exercises)
     •  Chapter 3
    1. Chapter 3: Matter and Energy
    2. 3.1: In Your Room
    3. 3.2: What is Matter?
    4. 3.3: Classifying Matter According to Its State: Solid, Liquid, and Gas
    5. 3.4: Classifying Matter According to Its Composition
    6. 3.5: Differences in Matter: Physical and Chemical Properties
    7. 3.6: Changes in Matter: Physical and Chemical Changes
    8. 3.7: Conservation of Mass: There is No New Matter
    9. 3.8: Energy
    10. 3.9: Energy and Chemical and Physical Change
    11. 3.10: Temperature: Random Motion of Molecules and Atoms
    12. 3.11: Temperature Changes: Heat Capacity
    13. 3.12: Energy and Heat Capacity Calculations
    14. 3.E: Exercises
     •  Chapter 4
    1. Chapter 4: Atoms and Elements
    2. 4.1: Experiencing Atoms at Tiburon
    3. 4.2: Indivisible: The Atomic Theory
    4. 4.3: The Nuclear Atom
    5. 4.4: The Properties of Protons, Neutrons, and Electrons
    6. 4.5: Elements: Defined by Their Numbers of Protons
    7. 4.6: Looking for Patterns: The Periodic Law and the Periodic Table
    8. 4.7: Ions: Losing and Gaining Electrons
    9. 4.8: Isotopes: When the Number of Neutrons Varies
    10. 4.9: Atomic Mass: The Average Mass of an Element’s Atoms
      •  Chapter 5
    1. Chapter 5: Molecules and Compounds
    2. 5.1: Sugar and Salt
    3. 5.2: Compounds Display Constant Composition
    4. 5.3: Chemical Formulas: How to Represent Compounds
    5. 5.4: A Molecular View of Elements and Compounds
    6. 5.5: Writing Formulas for Ionic Compounds
    7. 5.6: Nomenclature: Naming Compounds
    8. 5.7: Naming Ionic Compounds
    9. 5.8: Naming Molecular Compounds
    10. 5.9: Naming Acids
    11. 5.10: Nomenclature Summary
    12. 5.11: Formula Mass: The Mass of a Molecule or Formula Unit
      •  Chapter 6
    1. Chapter 6: Chemical Composition
    2. 6.1: How Much Sodium?
    3. 6.2: Counting Nails by the Pound
    4. 6.3: Counting Atoms by the Gram
    5. 6.4: Counting Molecules by the Gram
    6. 6.5: Chemical Formulas as Conversion Factors
    7. 6.6: Mass Percent Composition of Compounds
    8. 6.7: Mass Percent Composition from a Chemical Formula
    9. 6.8: Calculating Empirical Formulas for Compounds
    10. 6.9: Calculating Molecular Formulas for Compounds
      •  Chapter 7
    1. Chapter 7: Chemical Reactions
    2. 7.1: Grade School Volcanoes, Automobiles, and Laundry Detergents
    3. 7.2: Evidence of a Chemical Reaction
    4. 7.3: The Chemical Equation
    5. 7.4: How to Write Balanced Chemical Equations
    6. 7.5: Aqueous Solutions and Solubility: Compounds Dissolved in Water
    7. 7.6: Precipitation Reactions: Reactions in Aqueous Solution That Form a Solid
    8. 7.7: Writing Chemical Equations for Reactions in Solution: Molecular, Complete Ionic, and Net Ionic Equations
    9. 7.8: Acid–Base and Gas Evolution Reactions
    10. 7.9: Oxidation–Reduction Reactions
    11. 7.10: Classifying Chemical Reactions
    12. 7.11: The Activity Series
     •  Chapter 8
    1. Chapter 8: Quantities in Chemical Reactions
    2. 8.1: Climate Change: Too Much Carbon Dioxide
    3. 8.2: Stoichiometry
    4. 8.3: Making Molecules: Mole-to-Mole Conversions
    5. 8.4: Making Molecules: Mass-to-Mass Conversions
    6. 8.5: Limiting Reactant, Theoretical Yield, and Percent Yield
    7. 8.6: Limiting Reactant, Theoretical Yield, and Percent Yield from Initial Masses of Reactants
    8. 8.7: Enthalpy: A Measure of the Heat Evolved or Absorbed in a Reaction
    Chapter 9
    1. Chapter 9: Electrons in Atoms and the Periodic Table
    2. 9.1: Blimps, Balloons, and Models of the Atom
    3. 9.2: Light: Electromagnetic Radiation
    4. 9.3: The Electromagnetic Spectrum
    5. 9.4: The Bohr Model: Atoms with Orbits
    6. 9.5: The Quantum-Mechanical Model: Atoms with Orbitals
    7. 9.6: Quantum-Mechanical Orbitals and Electron Configurations
    8. 9.7: Electron Configurations and the Periodic Table
    9. 9.8: The Explanatory Power of the Quantum-Mechanical Model
    10. 9.9: Periodic Trends: Atomic Size, Ionization Energy, and Metallic Character
     •  Chapter 10
    1. Chapter 10: Chemical Bonding
    2. 10.1: Bonding Models and AIDS Drugs
    3. 10.2: Representing Valence Electrons with Dots
    4. 10.3: Lewis Structures of Ionic Compounds: Electrons Transferred
    5. 10.4: Covalent Lewis Structures: Electrons Shared
    6. 10.5: Writing Lewis Structures for Covalent Compounds
    7. 10.6: Resonance: Equivalent Lewis Structures for the Same Molecule
    8. 10.7: Predicting the Shapes of Molecules
    9. 10.8: Electronegativity and Polarity: Why Oil and Water Don’t Mix
     •  Chapter 11
    1. Chapter 11: Gases
    2. 11.1: Extra-Long Straws
    3. 11.2: Kinetic Molecular Theory: A Model for Gases
    4. 11.3: Pressure: The Result of Constant Molecular Collisions
    5. 11.4: Boyle’s Law: Pressure and Volume
    6. 11.5: Charles’s Law: Volume and Temperature
    7. 11.6: Gay-Lussac's Law: Temperature and Pressure
    8. 11.7: The Combined Gas Law: Pressure, Volume, and Temperature
    9. 11.8: Avogadro’s Law: Volume and Moles
    10. 11.9: The Ideal Gas Law: Pressure, Volume, Temperature, and Moles
    11. 11.10: Mixtures of Gases: Why Deep-Sea Divers Breathe a Mixture of Helium and Oxygen
    12. 11.11: Gases in Chemical Reactions
     •  Chapter 12
    1. Chapter 12: Liquids, Solids, and Intermolecular Forces
    2. 12.1: Interactions between Molecules
    3. 12.2: Properties of Liquids and Solids
    4. 12.3: Intermolecular Forces in Action: Surface Tension and Viscosity
    5. 12.4: Evaporation and Condensation
    6. 12.5: Melting, Freezing, and Sublimation
    7. 12.6: Types of Intermolecular Forces: Dispersion, Dipole–Dipole, Hydrogen Bonding, and Ion-Dipole
    8. 12.7: Types of Crystalline Solids: Molecular, Ionic, and Atomic
    9. 12.8: Water: A Remarkable Molecule
     •  Chapter 13
    1. Chapter 13: Solutions
    2. 13.1: Prelude - Tragedy in Cameroon
    3. 13.2: Solutions: Homogeneous Mixtures
    4. 13.3: Solutions of Solids Dissolved in Water: How to Make Rock Candy
    5. 13.4: Solutions of Gases in Water: How Soda Pop Gets Its Fizz
    6. 13.5: Solution Concentration: Mass Percent
    7. 13.6: Solution Concentration: Molarity
    8. 13.7: Solution Dilution
    9. 13.8: Solution Stoichiometry
    10. 13.9: Freezing Point Depression and Boiling Point Elevation: Making Water Freeze Colder and Boil Hotter
    11. 13.10: Osmosis: Why Drinking Salt Water Causes Dehydration
      •  Chapter 14
    1. Chapter 14: Acids and Bases
    2. 14.1: Sour Patch Kids and International Spy Movies
    3. 14.2: Acids: Properties and Examples
    4. 14.3: Bases: Properties and Examples
    5. 14.4: Molecular Definitions of Acids and Bases
    6. 14.5: Reactions of Acids and Bases
    7. 14.6: Acid–Base Titration: A Way to Quantify the Amount of Acid or Base in a Solution
    8. 14.7: Strong and Weak Acids and Bases
    9. 14.8: Water: Acid and Base in One
    10. 14.9: The pH and pOH Scales: Ways to Express Acidity and Basicity
    11. 14.10: Buffers: Solutions That Resist pH Change
     

    Template:HideTOC

    Learning Objectives
    • Use the activity series to predict if a reaction will occur.

    We see below two metals that can be exposed to water. The picture on the left is of sodium, which has a violent reaction when it comes in contact with water. The picture on the right is of silver, a metal so unreactive with water that it can be made into drinking vessels. Both metals have a single \(s\) electron in their outer shell, so you would predict a similar reactivity from each. However, we have a tool that allows us to make better predictions about how certain elements will react with others.

    A geyser erupting with a colorful plume of water on the left; on the right, two shiny metallic cups of different sizes.
    Figure \(\PageIndex{1}\): On the left, sodium reacts with water. On the right, silver in the form of cups does not react with water.

    The Activity Series

    Single-replacement reactions only occur when the element that is doing the replacing is more reactive than the element that is being replaced. Therefore, it is useful to have a list of elements in order of their relative reactivity. The activity series is a list of elements in decreasing order of their reactivity. Since metals replace other metals, while nonmetals replace other nonmetals, they each have a separate activity series. The table \(\PageIndex{1}\) below is an activity series of most common metals, and the table \(\PageIndex{2}\) is an activity series of the halogens.

    Table \(\PageIndex{1}\): Activity Series of Metal Elements
    Elements, from most to least reactive Reaction Occurring

    \(\ce{Li}\)

    \(\ce{K}\)

    \(\ce{Ba}\)

    \(\ce{Sr}\)

    \(\ce{Ca}\)

    \(\ce{Na}\)

    React with cold water, replacing hydrogen.

    \(\ce{Mg}\)

    \(\ce{Al}\)

    \(\ce{Zn}\)

    \(\ce{Cr}\)

    \(\ce{Fe}\)

    \(\ce{Cd}\)

    React with steam, but not cold water, replacing hydrogen.

    \(\ce{Co}\)

    \(\ce{Ni}\)

    \(\ce{Sn}\)

    \(\ce{Pb}\)

    Do not react with water. React with acids, replacing hydrogen.
    \(\ce{H_2}\)  

    \(\ce{Cu}\)

    \(\ce{Hg}\)

    \(\ce{Ag}\)

    \(\ce{Pt}\)

    \(\ce{Au}\)

    Unreactive with water or acids.
    Table \(\PageIndex{2}\): Activity Series of Nonmetal elements
    Elements, from most to least reactive
    \(\ce{F_2}\)
    \(\ce{Cl_2}\)
    \(\ce{Br_2}\)
    \(\ce{I_2}\)

    For a single-replacement reaction, a given element is capable of replacing an element that is below it in the activity series. This can be used to predict if a reaction will occur. Suppose that small pieces of the metal nickel were placed into two separate aqueous solutions: one of iron (III) nitrate and one of lead (II) nitrate. Looking at the activity series, we see that nickel is below iron, but above lead. Therefore, the nickel metal will be capable of replacing the lead in a reaction, but will not be capable of replacing iron.

    \[\ce{Ni} \left( s \right) + \ce{Pb(NO_3)_2} \left( aq \right) \rightarrow \ce{Ni(NO_3)_2} \left( aq \right) + \ce{Pb} \left( s \right) \nonumber \]

    \[\ce{Ni} \left( s \right) + \ce{Fe(NO_3)_3} \left( aq \right) \rightarrow \text{NR (no reaction)} \nonumber \]

    In the descriptions that accompany the activity series of metals, a given metal is also capable of undergoing the reactions described below that section. For example, lithium will react with cold water, replacing hydrogen. It will also react with steam and with acids, since that requires a lower degree of reactivity.

    Examples \(\PageIndex{1}\)

    Use the activity series to predict if the following reactions will occur. If not, write \(\text{NR}\). If the reaction does occur, write the products of the reaction and balance the equation.

    1. \(\ce{Al} \left( s \right) + \ce{Zn(NO_3)_2} \left( aq \right) \rightarrow\)
    2. \(\ce{Ag} \left( s \right) + \ce{HCl} \left( aq \right) \rightarrow\)
    Solution
    Solutions to Example 7.11.1
    Steps

    Example \(\PageIndex{1A}\)

    \(\ce{Al} \left( s \right) + \ce{Zn(NO_3)_2} \left( aq \right) \rightarrow\)

    Example \(\PageIndex{1B}\)

    \(\ce{Ag} \left( s \right) + \ce{HCl} \left( aq \right) \rightarrow\)

    Plan the problem. Compare the placements of aluminum and zinc on the activity series (Table \(\PageIndex{1}\)) Compare the placements of silver and hydrogen (Table \(\PageIndex{1}\))
    Solve.

    Since aluminum is above zinc, it is capable of replacing it and a reaction will occur. The products of the reaction will be aqueous aluminum nitrate and solid zinc. Take care to write the correct formulas for the products before balancing the equation. Aluminum adopts a \(+3\) charge in an ionic compound, so the formula for aluminum nitrate is \(\ce{Al(NO_3)_3}\). The balanced equation is:

    \(2 \ce{Al} \left( s \right) + 3 \ce{Zn(NO_3)_2} \left( aq \right) \rightarrow 2 \ce{Al(NO_3)_3} \left( aq \right) + 3 \ce{Zn} \left( s \right)\)

    Since silver is below hydrogen, it is not capable of replacing hydrogen in a reaction with an acid.

    \(\ce{Ag} \left( s \right) + \ce{HCl} \left( aq \right) \rightarrow \text{NR}\)

    Exercise \(\PageIndex{1}\)

    Use the activity series to predict the products, if any, of each equation.

    1. \(\ce{FeCl2 + Zn →}\)
    2. \(\ce{HNO3 + Au →}\)
    Answer a
    The products are ZnCl2 + Fe.
    Answer b
    No reaction.

    Summary

    • Metals and halogens are ranked according to their ability to displace other metals or halogens below them in the activity series.

    7.11: The Activity Series is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by LibreTexts.