9.5: Acid and Base Strength

Introduction to Chemistry & the Environment · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    9.5: Acid and Base Strength

    In the previous sections, you learned that acids donate protons (H⁺) and bases accept protons. However, not all acids donate their protons equally well, and not all bases accept protons to the same extent.

    Some acids transfer nearly every available proton to water, while others transfer only a small fraction. This difference is known as acid strength.

    Similarly, some bases readily accept protons, while others react only to a limited extent. Understanding acid and base strength helps explain why different substances produce different concentrations of hydronium and hydroxide ions, even when prepared at the same concentration.


    Strong and Weak Acids

    The strength of an acid depends on how completely it donates its proton to water, not on how much acid is present.

    A strong acid ionizes essentially completely in water. Nearly every acid molecule transfers its proton to a water molecule, producing hydronium ions.

    For example, when hydrochloric acid, HCl, reacts with water:

    \[ \Large\boldsymbol{ \mathrm{HCl}(aq) \quad + \quad \mathrm{H}_{2}\mathrm{O}(l) \quad \longrightarrow \quad \mathrm{H}_{3}\mathrm{O}^{+}(aq) \quad + \quad \mathrm{Cl}^{-}(aq) } \]

    Almost every HCl molecule undergoes this reaction.

    A weak acid, on the other hand, ionizes only partially. Most of the acid molecules remain unchanged, while only a small fraction donate their protons.

    For example, when acetic acid, CH3COOH, reacts with water:

    \[ \Large\boldsymbol{ \mathrm{CH}_{3}\mathrm{COOH}(aq) \quad + \quad \mathrm{H}_{2}\mathrm{O}(l) \quad \rightleftharpoons \quad \mathrm{H}_{3}\mathrm{O}^{+}(aq) \quad + \quad \mathrm{CH}_{3}\mathrm{COO}^{-}(aq) } \]

    Only a few acetic acid molecules ionize, fewer hydronium ions are produced. This means that the acid is not as strong as the HCl in the previous example, even if both are provided in the same concentration.


    Strong and weak acids and bases differ in their ability to ionize

    Figure \(\PageIndex{1}\): Strong and weak acids differ in the extent of ionization. Comparison of the ionization of a strong acid (hydrochloric acid, HCl) and a weak acid (acetic acid, CH₃COOH) in water. Hydrochloric acid reacts essentially completely with water, producing chloride ions (Cl⁻) and hydronium ions (H₃O⁺), and is represented by a single forward reaction arrow. Acetic acid reacts only partially with water, producing acetate ions (CH₃COO⁻) and hydronium ions while most acetic acid molecules remain un-ionized. This reaction is represented by equilibrium arrows, indicating that both reactants and products are present. The figure illustrates that strong acids ionize almost completely, whereas weak acids ionize only partially.


    Strong and Weak Bases

    Bases also differ in their strength. Strong bases, such as sodium hydroxide (NaOH), dissociate completely in water, producing hydroxide ions.

    \[ \Large\boldsymbol{ \mathrm{NaOH}(aq) \quad \longrightarrow \quad \mathrm{Na}^{+}(aq) \quad + \quad \mathrm{OH}^{-}(aq) } \]

    Weak bases, such as ammonia (NH₃), react with water only to a limited extent.

    \[ \Large\boldsymbol{ \mathrm{NH}_{3}(aq) \quad + \quad \mathrm{H}_{2}\mathrm{O}(l) \quad \rightleftharpoons \quad \mathrm{NH}_{4}^{+}(aq) \quad + \quad \mathrm{OH}^{-}(aq) } \]

    Only a fraction of the ammonia molecules accept a proton, so fewer hydroxide ions are produced.


    Strong Does Not Mean Concentrated

    One of the most common misconceptions is that strong and concentrated mean the same thing. They do not. Strength describes how completely an acid or base ionizes. Concentration describes how much acid or base is dissolved in a given volume of solution. For example, a dilute hydrochloric acid solution is still a strong acid because every HCl molecule ionizes. Likewise, a concentrated acetic acid solution is still a weak acid because only a fraction of its molecules ionize. Strength and concentration describe two completely different properties.


    Strong Acids and Bases are different than concentrated ones

    Figure \(\PageIndex{2}\): Strong Does Not Mean Concentrated. Four beakers compare acid strength and concentration. The top row shows dilute and concentrated solutions of hydrochloric acid (HCl), a strong acid. Although the concentrated solution contains more acid particles than the dilute solution, nearly all HCl molecules ionize in both cases, producing hydronium (H₃O⁺) and chloride (Cl⁻) ions. The bottom row shows dilute and concentrated solutions of acetic acid (CH₃COOH), a weak acid. In both solutions, most acetic acid molecules remain un-ionized, with only a small number forming acetate ions (CH₃COO⁻) and hydronium ions. The figure illustrates that acid strength describes the extent of ionization, while concentration describes the amount of acid dissolved in solution. A strong acid can be either dilute or concentrated, and a weak acid can also be either dilute or concentrated.


    Ionization and Chemical Equilibrium

    Did you notice something different about the equations for hydrochloric acid and acetic acid?

    Hydrochloric acid is written with a single reaction arrow.

    \[ \Large\boldsymbol{ \mathrm{HCl}(aq) \quad + \quad \mathrm{H}_{2}\mathrm{O}(l) \quad \longrightarrow \quad \mathrm{H}_{3}\mathrm{O}^{+}(aq) \quad + \quad \mathrm{Cl}^{-}(aq) } \]

    Acetic acid is written with a double arrow.

    \[ \Large\boldsymbol{ \mathrm{CH}_{3}\mathrm{COOH}(aq) \quad + \quad \mathrm{H}_{2}\mathrm{O}(l) \quad \rightleftharpoons \quad \mathrm{H}_{3}\mathrm{O}^{+}(aq) \quad + \quad \mathrm{CH}_{3}\mathrm{COO}^{-}(aq) } \]

    The double arrow indicates that the reaction is reversible.

    As acetic acid molecules donate protons, some acetate ions accept those protons and reform acetic acid. Eventually, the forward and reverse reactions occur at the same rate. At this point, the system has reached chemical equilibrium.

    Although both reactions continue to occur, the concentrations of reactants and products remain constant.

    For weak acids and weak bases, equilibrium lies far toward the reactants, meaning that most molecules remain un-ionized.


    Ionization of acetic acid in water is reversible

    Figure \(\PageIndex{3}\): Chemical Equilibrium is Dynamic. The ionization of acetic acid in water is shown as a reversible reaction: CH₃COOH + H₂O ⇌ CH₃COO⁻ + H₃O⁺. Larger forward and smaller reverse arrows indicate that the equilibrium lies toward the reactants, so most acetic acid molecules remain un-ionized. A balance scale below the reaction illustrates that, at equilibrium, the forward and reverse reaction rates are equal. Because the forward and reverse reactions occur at the same rate, the concentrations of reactants and products remain constant over time, even though both reactions continue to occur.


    Conjugate Acid–Base Strength

    The strength of an acid is closely related to the strength of its conjugate base.

    A strong acid has a very weak conjugate base.

    For example,

    \[ \Large\boldsymbol{ \mathrm{HCl}(aq) \quad \longrightarrow \quad \mathrm{Cl}^{-}(aq) } \]

    The chloride ion has very little tendency to accept a proton, so HCl readily donates it. Thus, the reaction of a strong acid is to go to completion and achieve full ionization.

    In contrast, a weak acid has a stronger conjugate base.

    For example,

    \[ \Large\boldsymbol{ \mathrm{CH}_{3}\mathrm{COOH}(aq) \quad \rightleftharpoons \quad \mathrm{CH}_{3}\mathrm{COO}^{-}(aq) } \]

    Because acetate ions readily accept protons, many acetic acid molecules reform. Thus, most of the acetic acid molecules remain in the un-ionized state.

    A similar relationship exists for bases. Strong bases have weak conjugate acids, while weak bases have stronger conjugate acids.

    The stronger the acid, the weaker its conjugate base.

    The weaker the acid, the stronger its conjugate base.


    Chemistry in Action

    Why does vinegar taste sour if it is a weak acid?

    Household vinegar contains acetic acid, a weak acid that ionizes only partially in water. Even though only a small fraction of acetic acid molecules donate protons, vinegar is often sold as a 5% solution, meaning it contains a relatively high concentration of acetic acid molecules. Because so many molecules are present, enough hydronium ions are produced to give vinegar its characteristic sour taste and make it useful for cooking, cleaning, and food preservation. This example highlights the important distinction between acid strength and acid concentration.


    This page titled 9.5: Acid and Base Strength was last modified on Tue, 11 Aug 2026 18:40:54 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Hadeel Abozenadah, Adam Bishop, Scott Bitner, Kaysha Lehman and Patricia Flatt.