5.1: Stoichiometry of Formulas and Equations

Chemistry 201 · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 1.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    5.1: Stoichiometry of Formulas and Equations

    Writing and Balancing Chemical Equations

    A chemical reaction is a process that neither creates nor destroys atoms, but it rearranges atoms in chemical compounds. A chemical equation uses chemical formulas to denote what occurs ina chemical reaction. A chemical equation is used to describe the chemical change that occurs when the original or starting substances, known as reactants, are converted to new substances, known as products. Reactants are written on the left side of the equation, whereas the products are on the right side. An arrow is used to indicate the direction of chemical change.

    The chemical equation for the reaction of hydrogen gas with oxygen gas to form water is shown below:

    2 H2 (g) + O2 (g) → 2 H2O (l)

    Atoms are neither created nor destroyed in a chemical reaction. To represent this in a chemical equation, coefficients may be used to balance the number of atoms of each element on both sides of the equation.

    When writing a chemical equation, we must indicate the physical state of each substance. We use the symbol (s) for solids, (l) for liquids, (g) for gases, and (aq) for aqueous solutions-a homogenous mixture in which a substance is dissolved in water.

    According to the Law of Conservation of Mass, the total mass of the products of a reaction is the same as the total mass of the reactants. During a chemical reaction, atoms are neither created nor destroyed; they are simply rearranged to form new substances. In order to satisfy this law, equations must be balanced; an equation is balanced by placing stoichiometric coefficients in front of one or more of the formulas, indicating that it is used more than once.

    For example, if a piece of sodium metal is dropped into water, a vigorous reaction occurs, producing hydrogen gas and sodium hydroxide solution. That sentence can be translated literally into a chemical equation:

    Na(s) + H2O(l) → H2(g) + NaOH(aq)

    As we examine the above equation, we notice that there are only 2 H atoms on the left side, but 3 H atoms on the right. We can start by putting a coefficient of 2 in front of water:

    Na(s) + 2 H2O(l) → H2(g) + NaOH(aq)

    Now, there are 4 H on the left and 3 on the right. Furthermore, O is now unbalanced (2 on the left and 1 on the right. Since O and H are both part of the same compound, NaOH, and there is one atom of each in that compound, if we add a coefficient of 2 in front of NaOH:

    Na(s) + 2 H2O(l) → H2(g) + 2 NaOH(aq)

    Now, both H and O are balanced: there are 4 H atoms on both sides of the equation, and 2 O atoms on both sides as well. However, Na is now not balanced, so we need to add a coefficient of 2 in front of Na:

    2 Na(s) + 2 H2O(l) → H2(g) + 2 NaOH(aq)

    The equation is now balanced. Note that in the absence of a numerical coefficient, as with H2, the coefficient is assumed to be 1.

    Solved Example:

    Balance the equation for the reaction of solid phosphorus pentachloride with liquid water, yielding aqueous solutions of phosphoric acid and hydrochloric acid.

    Translate the word reaction into a chemical equation using the chemical formula of each substance. Make sure to indicate the state of matter if given.

    ___PCl5(s) + ___H2O(l) → ___H3PO4(aq) + ___HCl(aq)

    Start with the element(s) that are in only one other formula. For example, P and O are found only in one compound on the left, and one on the right. However, H is found in 2 compounds on the right, so we will balance H last. Since there is 1 P atom on both sides of the equation, P is already balanced. There is only 1 O atom on the left, but 4 on the right. So, we will add a coefficient of 4 in front of water:

    ___PCl5(s) + _4__H2O(l) → ___H3PO4(aq) + ___HCl(aq)

    Next, let’s balance Cl. Since there are 5 Cl atoms on the left, but only 1 on the right, we will add a coefficient of 5 in front of HCl:

    ___PCl5(s) + _4__H2O(l) → ___H3PO4(aq) + _5__HCl(aq)

    At this point, all elements are balanced: There are 1 P, 5 Cl, 8 H, and 4 O on each side of the equation.

    Balancing a chemical equation requires something of a trail-and-error approach. In general, it will facilitate the balancing process if you do the following:

    1. Change the cofficients of compounds (e.g., CO2) before changing the coefficients of elements (e.g., O2)

    2. Treat polyatomic ions that appear on both sides of the equation as units, rather than counting their atoms individually.

    3. Count atoms and/or polyatomic ions carefully, and track their numbers each time you change a coefficient.

    Balancing Chemical Equations Examples

    EXAMPLE 3.1

    Write a balanced equation for the reaction between solid cobalt(III) oxide and solid carbon to produce solid cobalt and carbon dioxide gas.

    Solution:

    1. Write a skeletal equation by writing chemical formulas for each of the reactant and products:

    Co2O3(s) + C(s) → Co(s) + CO2(g)

    2. Balance atoms that occur in more complex substances first. Always balance atoms in compounds before atoms in pure substances:

    We will begin with O: There are 3 O atoms on the left and 2 on the right. To balance O, put a 2 before Co2O3 and a 3 before CO2

    2 Co2O3(s) + C(s) → Co(s) + 3 CO2(g)

    3. Balance atoms that occur as free elements on either side of the equation last. Always balance free elements by adjusting the coefficient on the free element.

    Balance Co first: There are 4 Co on the left, and 1 Co on the right. To balance Co, put a 4 before Co(s)

    2 Co2O3(s) + C(s) → 4 Co(s) + 3 CO2(g)

    Balance C: There are 1 C on the left, and 3 on the right. To balance C, put a 3 before C(s)

    2 Co2O3(s) + 3 C(s) → 4 Co(s) + 3 CO2(g)

    4. If the balanced equation contains coefficient fractions, clear these by multiplying the entire equation by the denominator of the fraction.

    This step is not necessary in this example.

    5. Check to make sure the equation is balanced by summing the total number of each type of atom on both sides of the equation.

    2 Co2O3(s) + 3 C(s) → 4 Co(s) + 3 CO2(g)

    Left: 4 Co, 6 O, 3 C Right: 4 Co, 6 O, 3 C

    The equation is balanced.

    EXAMPLE 3.2

    Write a balanced equation for the combustion of gaseous ethane (C2H6), a minority component of natural gas, in which it combines with gaseous oxygen to form gaseous carbon dioxide and gaseous water.

    Solution:

    1. Write a skeletal equation by writing chemical formulas for each of the reactant and products:

    C2H6(g) + O2(g) → CO2(g) + H2O(g)

    2. Balance atoms that occur in more complex substances first. Always balance atoms in compounds before atoms in pure substances:

    We will begin with C: There are 2 C atoms on the left and 1 on the right. To balance C, put a 2 before CO2(g)

    C2H6(g) + O2(g) → 2 CO2(g) + H2O(g)

    We will then balance H: There are 6 H atoms on the left and 2 on the right. To balance H, put a 3 before H2O(g)

    C2H6(g) + O2(g) → 2 CO2(g) + 3 H2O(g)

    3. Balance atoms that occur as free elements on either side of the equation last. Always balance free elements by adjusting the coefficient on the free element.

    We need to balance O: There are 2 O atoms on the left, and 7 on the right. To balance O, put a 7/2 before O2(g)

    C2H6(g) + 7/2 O2(g) → 2 CO2(g) + 3 H2O(g)

    4. If the balanced equation contains coefficient fractions, clear these by multiplying the entire equation by the denominator of the fraction.

    x2 [C2H6(g) + 7/2 O2(g) → 2 CO2(g) + 3 H2O(g)] → 2 C2H6(g) + 7 O2(g) → 4 CO2(g) + 6 H2O(g)

    5. Check to make sure the equation is balanced by summing the total number of each type of atom on both sides of the equation.

    2 C2H6(g) + 7 O2(g) → 4 CO2(g) + 6 H2O(g)

    Left: 4 C, 12 H, 14 O Right: 4 C, 12 H, 14 O

    The equation is balanced.

    For Practice:

    1. Write a balanced equation for the reaction between solid silicon dioxide and solid carbon to produce solid silicon carbide and carbon monoxide gas.

    2. Write a balanced equation for the combustion of gaseous butane (C4H10), a fuel used in portable stoves and grills, in which it combines with gaseous oxygen to form gaseous carbon dioxide and gaseous water.

    3. Solid sodium hydrogen carbonate reacts to form solid sodium carbonate, water, and carbon dioxide gas.

    Calculating Quantities of Reactant and Product

    Balanced chemical equations are very helpful tools to help us predict how much of a particular product will form from a given ammount of a reactant, or measuring the amount of product formed, we can use this information to calculate the amount of reactant needed.

    Moles of Reactants and Products

    Based on the equation for the reaction of nitrogen gas with hydrogen gas to produce ammonia, NH3:

    N2(g) + 3 H2(g) → 2 NH3(g)

    1 mole of N2 combines with 3 moles of H2 to produce 2 moles of NH3. We can write conversion factors using these stoichiometric coefficients to help us calculate the amount of NH3 produced given any amount of N2 or H2 used, or how much of N2 or H2 is necessary to produce a specific amount of NH3.

    The conversion factors can express the relationship between each reactant and the product, as well as the relationship between the two reactants. These can be written as

    Illustration Illustration Illustration

    The ratio can also be written as the reciprocal:

    Illustration Illustration Illustration

    Consider the complete reaction of 3.35 moles of N2 to form NH3. To calculate the number of moles of NH3 produced, we use the conversion factor with moles of NH3 in the numerator and moles of N2 in the denominator:

    Illustration Illustration Illustration = Illustration

    We can determine the stoichiometric amount of H2 (the exact number of moles of H2 needed to react with 3.35 moles of N2):

    Illustration Illustration Illustration Illustration Illustration

    Example 3.3

    How many moles of H2 will be produced if 0.550 mol Li reacts according to the following equation?

    2 Li(s) + 2 H2O(l) → 2 LiOH(aq) + H2(g)

    Solution:

    According to the balanced chemical equation, the conversion factor for H2 and Li is either

    Illustration or Illustration

    To calculate the number of moles produced for H2, we choose the conversion factor in which H2 is in the numerator:

    Illustration Illustration Illustration Illustration

    Practice:

    1. Tetraphosphorus decoxide (P4O10) reacts with water to produce phosphoric acid. Write a balanced equation for this reaction and determine the number of moles of each reactant required to produce 7.50 moles of phosphoric acid.

    2. Consider the combustion of butane (C4H10).

    2 C4H10(g) + 13 O2(g) → 8 CO2(g) + 10 H2O(l)

    In a particular reaction, 5.0 moles of C4H10 react with an excess of O2. Calculate the number of moles of CO2 formed.

    Mass of Reactants and Products

    Balanced chemical equations give us the relative amounts of reactants and products in terms of moles. However, because we measure reactants and products in the laboratory by weighing them, most often such calculations start with mass rather than the number of moles.

    Example 3.4

    Calculate the mass of water produced by the metabolism of 65.5 g of glucose (C6H12O6), according to the following equation:

    C6H12O6(s) + 6 O2(g) → 6 CO2(g) + 6 H2O(l)

    Solution:

    We need to use the molar mass of C6H12O6 to convert the given mass to moles, then use the appropriate stoichiometric conversion factor to convert moles of C6H12O6 to moles of water, then using the molar mass of water, we convert to grams of water.

    The molar mass are as follows: 180.16 g/mol for C6H12O6 and 18.02 g/mol for H2O. The conversion factor from C6H12O6 to water is:

    Illustration

    Illustration Illustration Illustration Illustration Illustration

    Practice:

    1. What mass of lithium nitride is produced when 252 g of lithium metal react with nitrogen according to the following equation?

    6 Li(s) + N2(g) → 2 Li3N(s)

    2. The fertilizer ammonium sulfate [(NH4)2SO4] is prepared by the reaction between ammonia (NH3) and sulfuric acid:

    2 NH3(g) + H2SO4(aq) → (NH4)2SO4(aq)

    How many kilograms of NH3 are needed to produce 1.00 x 105 kg of (NH4)2SO4?

    Limiting Reactant

    In a chemical reaction, the limiting reactant (also called a limiting reagent) is the substance that is completely consumed first. Because it runs out before the other reactants, it determines the maximum amount of product that can be formed. Excess reactants are those present in quantities greater than necessary to react with the quantity of the limiting reactant.

    Determining the Limiting Reactant

    In problems involving limiting reactants, the first step is to determine which reactant is the limiting reactant. In order to do this, we need to follow these steps:

    1. Make sure the equation is balanced.

    2. Calculate the number of moles of each reactant.

    3. Using the stoichiometric coefficients, convert the number of moles of each reactant to moles (or grams) of product.

    3. The reactant that produces the least amount of product is the limiting reactant.

    Example 3.5

    What mass of HF is produced according to the given equation when 5.00 g of each reactant are combined? What amount of excess reactant remains after the reaction is complete?

    CaF2(s) + H2SO4(aq) → CaSO4(s) + 2 HF(g)

    Solution:

    Using its molar mass, convert 5.00 of CaF2 to moles of CaF2, then using the stoichiometric coefficients from the balanced equation, determine the number of moles of HF, and then using the molar mass of HF convert to mass of HF.

    Follow the same steps above using the mass of H2SO4. The reactant that produces the least amount of HF is the limiting reactant, and it will be the one used to determine how much of HF is produced.

    General Procedure:

    mass of reactant A → moles of A → moles of product → mass of product

    Illustration Illustration Illustration IllustrationIllustration

    Illustration Illustration Illustration IllustrationIllustration

    Since H2SO4 produced the least amount of HF, H2SO4 is the limiting reactant, and the amount of HF produced is 2.04 g.

    Limiting reactant also determines how much of the other reactant is consumed in the chemical reaction. Using mass-mass conversion, use the mass of the limiting reactant given (H2SO4) to find the mass of CaF2 used:

    IllustrationIllustrationIllustration Illustration Illustration

    So the amount of HF used up in the reaction is 3.98 g. Excess amount of HF that remains after the reaction is complete is:

    Illustration

    Determining the Limiting Reactant and Theoretical Yield for a Reaction: https://youtu.be/HmDm1qpNUD0

    Practice:

    1. Carbon dioxide can be removed from the air by reaction with potassium hydroxide: CO2 + 2 KOH → K2CO3 + H2O. If 15.6 g of carbon dioxide reacts with 43.0 g of potassium hydroxide, what mass of potassium carbonate will be formed? What amount of excess reactant remains after the reaction is complete?

    2. Aluminum nitrite and ammonium chloride react to form aluminum chloride, nitrogen gas, and water. How many grams of each substance are present after 72.5 g of aluminum nitrite and 58.6 g of ammonium chloride react completely.

    Theoretical, Actual, and Percent Yields

    In example 3.5 above, we determined that the limiting reactant is H2SO4 and the amount of HF produced is 2.04 g. This is called the theoretical yield, the amount of product calculated based on the stoichiometry of the balanced chemical equation. In other words, the theoretical yield is the amount of product that forms when all the limiting reactant reacts to form the desired product. It is the maximum obtainable yield, predicted by the balanced equation. In practice, the actual yield-the amount of product actually obtained from a reaction-is almost always less than the theoretical yield. Chemists often determine the efficiency of a chemical reactions by calculating its percent yield, which tells what percentage the actual yield is of the theoretical yield. It is calculated as follows:

    Illustration

    Example 3.6

    Hydrogen fluoride is used in the manufacture of Freons (which destroys ozone in the stratosphere) and in the production of aluminum metal. It is prepared by the reaction

    CaF2 + H2SO4 → CaSO4 + 2 HF

    In one process, 6.00 kg of CaF2 are treated with an excess of H2SO4 to yield 2.86 kg of HF. Calculate the percent yield of HF.

    Solution:

    We are given that the actual yield is 2.86 kg of HF. Given the balanced chemical equation, and the initial mass of 6.00 kg of CaF2, you need to use the stoichiometric coefficients and determine the theoretical yield of HF.

    Convert mass CaF2 to moles CaF2 using its molar mass, use the molar coefficients from the balanced equation to find moles of HF, and then the molar mass of HF convert to mass:

    Illustration Illustration Illustration Illustration Illustration Illustration

    Illustration

    Illustration

    Practice:

    1. Titanium(IV) oxide (TiO2) is a white substance produced by the action of sulfuric acid on the mineral ilmenite (FeTiO3):

    FeTiO3 + H2SO4 → TiO2 + FeSO4 + H2O

    Its opaque and nontoxic properties make it suitable as a pigment in plastics and paints. In one process, 8.00 x 103 kg of FeTiO3 yielded 3.67 x 103 kg of TiO2. What is the percent yield of the reaction?

    2. Aspirin, acetylsalicylic acid (C9H8O4), is the most commonly used pain reliever in the world. It is produced by the reaction of salicylic acid (C7H6O3) and acetic anhydride (C4H6O3) according to the following equation:

    C7H6O3 + C4H6O3 → C9H8O4 + HC2H3O2

    In a certain aspirin synthesis, 104.8 g of salicylic acid and 110.9 g of acetic anhydride are combined. Calculate the percent yield of the reaction if 105.6 g of aspirin are produced.


    This page titled 5.1: Stoichiometry of Formulas and Equations was last modified on Sat, 25 Apr 2026 02:02:08 GMT and is shared under a CC BY-NC-SA 1.0 license and was authored, remixed, and/or curated by .