7.3: Thermodynamics of Borax - Data and Report

General Chemistry II Lab Manual · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    7.3: Thermodynamics of Borax - Data and Report

    Name: ____________________ Partner(s): ____________________ Date: ____________________

    DATA AND OBSERVATIONS

    Part A: Standardization of Hydrochloric Acid

    Table 1: Standardization of HCl Data
    Titration Parameter Trial 1 Trial 2 Trial 3 Trial 4 (if needed)
    1. Mass of Na2CO3 (g) __________ __________ __________ __________
    2. Initial buret reading (mL) __________ __________ __________ __________
    3. Final buret reading (mL) __________ __________ __________ __________
    4. Volume of HCl delivered (mL) __________ __________ __________ __________
    5. Calculated Molarity of HCl (M) __________ __________ __________ __________

    Average Standardized HCl Molarity: ____________________ M

    Sample HCl Molarity Calculation (Show work):

    __________
     
     
     

    Part C: Analysis of Borax Test Solutions

    Table 2: Borax Titration Measurements
    Measurement Parameter Tube 1 Tube 2 Tube 3 Tube 4 Tube 5 Tube 6
    Approx. Temp (°C) 0 Room 32 40 48 56
    Actual Temp (°C) __________ __________ __________ __________ __________ __________
    Initial buret (mL) __________ __________ __________ __________ __________ __________
    Final buret (mL) __________ __________ __________ __________ __________ __________
    Vol. of HCl (mL) __________ __________ __________ __________ __________ __________

    POST-LAB CALCULATIONS AND ANALYSIS

    1. Calculate the molar solubility (S) of borax at each measured temperature from your titration volumes. Show a sample calculation setup below:

      __________
       
       
       

    2. Calculate the solubility product constant (Ksp = 4S3) for each temperature. Show a sample calculation setup below:

      __________
       
       
       

    Table 3: Calculated Thermodynamic Data Summary
    Calculated Quantity Tube 1 Tube 2 Tube 3 Tube 4 Tube 5 Tube 6
    Temperature (K) __________ __________ __________ __________ __________ __________
    1/T (K−1) __________ __________ __________ __________ __________ __________
    Molar Solubility, S (M) __________ __________ __________ __________ __________ __________
    Ksp __________ __________ __________ __________ __________ __________
    ln Ksp __________ __________ __________ __________ __________ __________
    DATA SKILL: LOGARITHMS IN EXCEL

    When calculating ln Ksp in Excel, keep these points in mind:

    1. NEGATIVE VALUES ARE EXPECTED: Because Ksp < 1, ln Ksp will be negative. Do not drop the negative sign.
    2. FUNCTION SELECTION: Use the Excel formula =LN() for the natural log. Using =LOG() (base-10) will distort your calculated slope by a factor of 2.303.
    1. Plot ln Ksp (y-axis) versus 1/T in Kelvin (x-axis) in Excel. Add a linear trendline and display the equation (y = mx + b) and Coefficient of Determination (R2) on the graph. Paste a copy of your graph below.
      Illustration
      Figure \(\PageIndex{1}\): Example van't Hoff Plot.

      __________
       
       
       
       

    2. Evaluate your Coefficient of Determination (R2). Explain how well your data conforms to the linear van 't Hoff model and discuss potential sources of error if R2 < 0.95.

      __________
       
       
       

    3. Calculate the standard enthalpy of solution (ΔH°) in kJ/mol from the slope (m) of your trendline (ΔH° = −m · R). Show complete calculations:

      __________
       
       
       

    4. Calculate the standard entropy of solution (ΔS°) in J/mol·K from the y-intercept (b) of your trendline (ΔS° = b · R). Show complete calculations:

      __________
       
       
       

    5. Calculate the standard Gibbs free energy change (ΔG°) for borax dissolution at 25.0 °C (298.15 K) using ΔG° = ΔH° − TΔS°. Is the process spontaneous at 25.0 °C? Explain your reasoning.

      __________
       
       
       


    This page titled 7.3: Thermodynamics of Borax - Data and Report was last modified on Wed, 21 Oct 2026 15:56:08 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Vince Hradil.