11.16: Using Charles' Law to Determine Absolute Zero

Quantum Tutorials · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    11.16: Using Charles' Law to Determine Absolute Zero

    A simple experiment to determine absolute zero using Charles' Law is illustrated below. An Erlenmeyer flask is weighed and placed in a boiling water bath and allowed to come to thermal equilibrium. The temperature is measured and found to be 99.0 oC. The flask is then submerged, inverted, in an ice bath (0.20 oC) and allowed to come to thermal equilibrium. The contraction of the air in the flask at the lower temperature draws water into the flask. The flask is carefully removed, the outside dried and it is weighed. Finally, the flask is filled with water (as shown below on the right) and weighed. The mass measurements are converted to high and low temperature gas volumes and Charles's Law, V = a⋅ T+ b, is used to calculate absolute zero.

    Screen Shot 2019-02-05 at 1.33.36 PM.png

    Screen Shot 2019-02-05 at 1.33.41 PM.png

    Convert mass measurements to high and low temperature gas volumes:

    High temperature: Vh := \( \frac{224.4 gm - 83.0 gm}{1 \frac{gm}{mL}}\) = 0.141 L; Th := 99.0 Celsius

    Low temperature: Vl := \( \frac{224.4 gm - 120.8 gm}{1 \frac{gm}{mL}}\) = 0.104 L; Tl := 0.20 Celsius

    An algebraic method is used to calculate absolute zero. Three equations are required because there are three unknowns: a, b, and T0. Absolute zero is interpreted as the temperature at which the gas volume goes to zero. This is the last equation in the set of equations used to calculate a, b and T0.

    \( \begin{pmatrix}
    V_{h} = a T_{h} + b\\
    V_{1} = a T_{l} + b\\
    0 = a T_{0} + b
    \end{pmatrix}|_{float, 4}^{solve, \begin{pmatrix}
    a\\
    b\\
    T_{o}
    \end{pmatrix}} \rightarrow [0.3826 \frac{mL}{Celsius}~103.5 mL~(-270.6) Celsius]\)

    The correct value for absolute zero is -273.2 oC. So this result is in error by approximately 1%.


    This page titled 11.16: Using Charles' Law to Determine Absolute Zero was last modified on Sat, 24 Sep 2022 17:08:06 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Frank Rioux via source content that was edited to the style and standards of the LibreTexts platform.