Opening the book…
In a set of collected data, there may be one or more values that deviate markedly from the trend of the others; in other words, there may be one or more data points that seem suspicious. If a measurement appears suspicious, we need evidence before deciding that it is statistically discordant with the rest of the data. One tool for doing this is the Q-test.
You should not reject a piece of data that seems suspect until you perform a Q-test.
In a set of data of three to ten measurements, the Q-test can be performed on a single suspicious data point as follows:
\[Q_{exp} \equiv \frac{\mid(\text { suspected outlier's value })-(\text {value closest to it }) \mid}{\text { (highest value })-(\text { lowest value })}\]
The following table provides critical values for \(Q_{critical} (\alpha, n)\), where:
- \(\alpha\) is the probability of incorrectly rejecting the suspected outlier,
- \(n\) is the number of samples in the data set.
| \(\frac {\alpha \ce{->}} {\text{no. of samples} \ce{ v }}\) | \(Q_{critical}\) \(\alpha =0.1\) (90% confidence limit) |
\(Q_{critical}\) \(\alpha =0.05\) (95% confidence limit) |
\(Q_{critical}\) \(\alpha =0.04\) (96% confidence limit) |
\(Q_{critical}\) \(\alpha =0.02\) (98% confidence limit) |
\(Q_{critical}\) \(\alpha =0.01\) (99% confidence limit) |
| n = 3 | 0.941 | 0.970 | 0.976 | 0.988 | 0.994 |
| n = 4 | 0.765 | 0.829 | 0.846 | 0.889 | 0.926 |
| n = 5 | 0.642 | 0.710 | 0.729 | 0.780 | 0.821 |
| n = 6 | 0.560 | 0.625 | 0.644 | 0.698 | 0.740 |
| n = 7 | 0.507 | 0.568 | 0.586 | 0.637 | 0.680 |
| n = 8 | 0.468 | 0.526 | 0.543 | 0.590 | 0.634 |
| n = 9 | 0.437 | 0.493 | 0.510 | 0.555 | 0.598 |
| n = 10 | 0.412 | 0.466 | 0.483 | 0.527 | 0.568 |
The Q-test:
Compare the value of \(Q_{exp}\) from the equation above to the critical value of \(Q_{critical}\).
- If \(Q_{exp} \ge Q_{critical}\) then the suspect value can be rejected.
- If \(Q_{exp} \le Q_{critical}\),the value should be retained in the data set.
For additional information consult Rorabacher, D. B. “Statistical Treatment for Rejection of Deviant Values: Critical Values of Dixon’s ‘Q’ Parameter and Related Subrange Ratios at the 95% confidence Level,” Anal. Chem. 1991, 63, 139–146. (see also http://chem-net.blogspot.com/2013/01...atistical.html)
This page titled 3.5: Rejection of Outliers (Q-test) was last modified on Wed, 12 Aug 2026 16:59:04 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Kathryn Haas.
The book could not be loaded just now.