2.3: Centrifugation

Qualitative Analysis of Common Cations in Water · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under Public Domain, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    2.3: Centrifugation
    A solution, a suspension, and separation of supernatant from the precipitate by centrifugation process are illustrated.
    Figure \(\PageIndex{1}\): Illustration of separation of supernatant from the precipitate by centrifugation process.

    The solid product, i.e., the precipitate is forced to form sediment or pellet at the bottom of the test tube under the action of centrifugal force as illustrated in Figure \(\PageIndex{1}\). A laboratory centrifuge machine contains a fast router with compartments to house the test tube as shown in Figure \(\PageIndex{2}\). The test tube compartments are arranged in a circle.

    • Always place two test tubes across the diagonal, one containing the solution of interest and the other similar test tube containing an equal volume of water to counterbalance the weight.

    Three similar test tubes with the same volume of liquid can also be placed at the corner of a triangle around the axis of the router to balance the weight. Close the lid and start the machine. If the weight is not balanced, the centrifuge machine will vibrate, shake, and may start moving or fly off causing damage when switched on.

    Caution
    • Always keep eye on the centrifuge when it starts -if there is any abnormal sound, shaking, or vibration, immediately switch off or unplug the centrifuge machine. When the centrifuge machine is unplugged or switched off, the router keeps running for a while before coming to stop. Never open the lid until the router comes to a complete stop.
    A common laboratory centrifuge machine
    Router of a common laboratory centrifuge machine showing test tube compartments arranged in a circle around the axis.
    A common laboratory centrifuge machine with sample loaded and lid closed, ready to start.
    Figure \(\PageIndex{2}\): A laboratory centrifuge machine with the lid open (left), router compartment showing test tubes placed across to balance the weight (middle), centrifuge ready to start with a sample loaded, and the lid closed.

    This page titled 2.3: Centrifugation was last modified on Wed, 17 May 2023 19:00:01 GMT and is shared under a Public Domain license and was authored, remixed, and/or curated by Muhammad Arif Malik.