Opening the book…
For crops it is not just about surviving a season. It is about productivity – plants need to flourish to meet our demands. They need an optimum supply of water, and they need it on a specific schedule. Too much at the wrong time can be just as damaging as too little.
If the environment cannot provide the water needed by plants, supplemental watering can be employed. Water rights, control of water sources, is a growing issue Worldwide. In the US, the tension is growing with the droughts cities and states fight over water. Sources of water tend to vary with location and geology. Water for large scale irrigation systems can be pulled from rivers or streams if there is a source close by. Holding ponds – farm/irrigation ponds – can be created it surface water by damming or diverting existing creeks and streams. A holding pond might also be created and fed by springs. If the region has aquifers below it, wells can be drilled to bring the water to the surface for use. Or for small scale irrigation such as your garden or lawn, municipal water sources can be an option.
There are many techniques that can be employed to deliver water to plants. For small scale application water can be added to individual plants or to groups of plants using a watering wand and/or a “fog-it”nozzle (Figure 6-22). These devices allow the user to modify the amount of water an individual plant gets and can be particularly useful in mixed plant settings where one plant might have a plant with a high demand adjacent to a xeric plant (dry habitat). The size of the water droplets can impact plant health. The larger droplet of a wand may be for larger, established plants but smaller droplets work better for young seedlings. “Fog-it nozzles” spray a very fine mist of water that is beneficial for seeded flats and young tender seedlings. The fine mist helps prevent displacement of seeds in a tray or the flatting of young seedlings as can happen with larger water drops. The downside is that the fine mist is not delivering much water at a time. While the surface may look saturated, the soil beneath is bone dry. The surface water quickly evaporates, leaving the seedling without water. Care must be taken that enough water is applied to penetrate the soil completely.
For large scale agricultural fields, center pivot irrigations systems are more practical (Figure 6-23). These systems consist of a pipe (typically aluminum) that supplies water to sprinkler heads along its length. The pipe (with the sprinkler heads) is moved on wheels around a center pivot, creating an irrigated circle. Originally the movement was powered by water pressure, but most systems today move via electric motors. Older systems had sprinkler heads along the top of the pipe, but modern systems now use dropped sprinkler heads to position the water just above the crop. The “drop” can be changed based on the crop’s height. This helps limit evaporative losses.
Smaller fields of horticultural crops and home gardens can be irrigated using drip and micro-irrigation systems. These systems deliver water at or near the root zone of the plant in significantly smaller amounts than large broadcast systems. This minimizes evaporation and runoff, making this the most efficient method of irrigation.
Drip systems can consist of either a hose with small holes that leak water at set intervals or a hose with drip emitters inserted. Figure 6-24 (left image) show a blue drip emitter. Emitters are selected based on the water volume needed by the plant. This works well in a mixed setting where different plants might have different water needs. Simple emitters allow water to flow outward at a set rate. Some applications require more sophisticated emitters that only allow water to leave the emitter under pressure. This prevents overwater that can happen as water drains out the lowest emitters post irrigation event.
In micro-irrigation systems, water is sprayed on the plants using small sprinkler heads (Figure 6-24-Right image). Again, the type of head selected will allow for control of volume, droplet size as well as spray patterns for highly customizable water delivery.
Water delivery can be automated by using timers to turn valves on and off (Figure 6-25). Depending on application and controllers, triggers for water can be based on time/day. For example, watering can be scheduled for 6 am every morning. Some controllers use light to control irrigation. A light sensor detects sunrise and triggers a watering cycle. It then counts the cumulative solar radiation (such as the DLI) until a threshold is reached, triggering another water cycle. This type of control can help conserve water since solar radiation often drives the plant’s water demand. On a cloudy day when little water is lost by the plants, less irrigation occurs.
Other adaptors can be used with the controllers to help determine when irrigation is needed. Soil moisture probes detect the level of water in the soil and can trigger a water cycle when needed. Rain sensors can detect rain fall and prevent irrigation cycles during rain events. Together these systems can help make sure adequate water is supplied but water is not wasted.
This page titled 6.4.1: Water for Crops was last modified on Fri, 13 Nov 2026 18:52:22 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Stephanie Harvey.
The book could not be loaded just now.