Opening the book…
Contact time is the period during which a disinfectant must remain in contact with a surface to achieve its specified effect. For many surface products, the surface must remain visibly wet for the stated time. 
A quick wipe followed by immediate drying may not meet that requirement. Likewise, using the correct product at the wrong dilution can produce an ineffective treatment.
Choose the agent using the laboratory's approved procedure, product instructions, target organisms, and surface compatibility. Follow requirements for application, ventilation, protective equipment, and disposal.
Alcohol solutions are commonly used for compatible surfaces, but alcohol does not reliably destroy bacterial spores. An alcohol wipe is therefore not evidence of sterilization. Organic material and the type of organism can also affect treatment performance.
Do not mix disinfectants or assume that a stronger solution will work better. Some
combinations release hazardous gases, and some products damage equipment. The approved concentration and method are part of the process. Keep disinfectants identified, prepared correctly, and within their stated use period. Record the relevant agent and required treatment when documentation is needed. A record should show what was done, rather than merely stating that the area was “clean.”

Attribution: Images AI-generated using ChatGPT Modified by Emalee Mackenzie, Irvine Valley College. Licensed under CC BY-NC-SA
This page titled 5.5: Contact Time and Disinfectant Selection was last modified on Wed, 21 Oct 2026 01:35:59 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.
The book could not be loaded just now.