3.10: Deviations and Documented Decisions

Cell Culture Textbook (Biot 77 IVC) · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    3.10: Deviations and Documented Decisions

    A discrepancy is a difference between information or quantities that should agree, or between an observation and a requirement. A deviation is a departure from an approved procedure or specified condition. Laboratories may define these terms differently. Examples include an unexplained inventory difference, a failed equipment check, and a culture held outside its specified conditions.

    Take appropriate steps to protect people and affected materials, notify the responsible person, and follow the laboratory’s response procedure. Do not continue merely because a culture or material looks acceptable. A hold restricts use while the issue is assessed. Clearly identify held material so it is not used accidentally.

    363f4c3d-a475-4ce7-b430-c4a726bf9542.pngRecord what happened, when it occurred or was discovered, what was affected, and what action was taken. Separate known facts from possible causes. Include related culture IDs, reagent lots, equipment IDs, and record references.

    An investigation asks how widely the problem extends and what evidence supports its cause. A pipette problem may affect several measurements. A mislabeled tube may raise questions about neighboring tubes. The review should consider these links rather than examining only the first item noticed.

    A correction addresses an identified problem, such as replacing a damaged label after confirming the sample’s identity. A corrective action addresses the cause of a problem to prevent it from recurring, such as revising a label process that allowed repeated mix-ups. A preventive action addresses the cause of a potential problem before it occurs. Check whether each action achieved its intended result.

    Disposition is the documented decision about what may happen to the affected material, such as acceptance, continued hold, or rejection. The person authorized by the quality system makes that decision. An operator's completed signature is not automatically a release authorization.

    Attribution: Images AI-generated using ChatGPT Modified by Emalee Mackenzie, Irvine Valley College. Licensed under CC BY-NC-SA


    This page titled 3.10: Deviations and Documented Decisions was last modified on Wed, 21 Oct 2026 01:35:49 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.