Opening the book…
A dilution factor is the final mixture volume divided by the volume of original sample in that mixture. Write the actual volumes rather than relying on an ambiguous ratio. Mixing 20 µL of sample with 80 µL of diluent makes 100 µL total, so the factor is 100 ÷ 20 = 5. This is one part sample in five parts final mixture.
If that diluted sample is then mixed with an equal volume of dye, the combined factor is 5 × 2 = 10. Suppose its average clear count is 25 cells per large square. The original viable concentration is 25 × 10,000 × 10 = 2.5 × 10⁶ cells/mL. Using only the dye factor would give 0.5 × 10⁶ cells/mL, five times too low.
Dilution factors multiply when each step further dilutes the counting sample. Resuspending the entire population in a new culture volume is a different operation. A count from that suspension already measures its new concentration. If the whole population is in 6 mL, use that concentration and 6 mL to find yield. Do not add a factor to restore an earlier volume.
Dimensional analysis is checking a calculation by following its units. Cells/mL multiplied by mL gives cells. Cells divided by cells/mL gives mL. Writing units makes it easier to detect an incorrect operation before it affects a culture.

Attribution: Images AI-generated using ChatGPT Modified by Emalee Mackenzie, Irvine Valley College. Licensed under CC BY-NC-SA
This page titled 10.7: Keeping Track of Dilution Factors was last modified on Wed, 21 Oct 2026 01:35:30 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.
The book could not be loaded just now.