Opening the book…
Preventing contamination requires control of both the culture’s surroundings and every material that contacts it. Microorganisms can enter through hands, supplies, exposed openings, or shared equipment. Cells from another line can enter through the same handling pathway. A culture may remain clear and continue growing after either problem begins, so prevention cannot depend on appearance alone. 
Before work, confirm that the selected biosafety cabinet is operating correctly. Clean and disinfect its work surface using the approved product, concentration, and contact time. Disinfect compatible equipment and container exteriors before bringing them inside. Check sterile packaging and reagent condition. Arrange clean supplies, active cultures, and waste so used items do not cross the clean work area. Keep airflow grilles clear.
Wash hands and wear the required protective clothing. Treat glove exteriors as surfaces that can collect contamination, not as permanently sterile barriers. Change gloves when damaged or contaminated, and disinfect them as required by the procedure. After touching a phone, door handle, or other unapproved surface, restore the required glove condition before returning to culture work. Open vessels only when ready to use them and close them promptly afterward. Protect the inside of caps, vessel openings, and pipette tips from contact with gloves, bottle threads, and work surfaces. Avoid reaching over exposed openings. Use controlled pipetting to limit splashes and aerosols. If a sterile tip touches an unapproved surface, stop and replace it; a tip that still looks clean may no longer be suitable.
Handle one cell line at a time. Confirm the source and receiving vessel labels before each transfer. Use fresh sterile tips or pipettes between cultures, and never move a used transfer tool into another line or a shared stock bottle. Close and remove the first line before opening the next. Manage used supplies, clean and disinfect the workspace, and change gloves between lines according to the laboratory’s procedure.
Keep reagents clearly identified and, where appropriate, prepare separate portions for each cell line. This reduces repeated exposure of shared stock bottles and limits connections between cultures. Do not return unused material from a working portion to the stock. Record reagent identity and lot information. If a shared reagent becomes suspect, identify all cultures that received it before further use.
Maintain protection during transport and incubation. Use the correct vessel closures, readable labels, and designated storage locations. Follow the approved cleaning schedule for incubators and shared equipment, including water reservoirs where present. Keep suspect cultures closed and separate under the defined response process; moving a flask to another shelf alone do
es not prevent shared handling or equipment exposure.
Quarantine restricts the handling and use of incoming or suspect cultures until required checks and review are complete. Keep the culture’s source, passage history, and test results linked to its identifier. Cell authentication checks its claimed identity. For many human cell lines, short tandem repeat profiling, or STR profiling, compares selected DNA patterns with an appropriate reference. Similar morphology or a familiar label cannot replace that evidence.
Authentication and microbial testing answer different questions. A mycoplasma-negative culture can still contain the wrong line, while a matching identity result does not establish freedom from microbes. If a handling error or transfer between lines is suspected, stop the affected work, document the vessels and shared materials involved, and follow the laboratory’s investigation process before using the cultures again.
Attribution: "Segregation & Dual Verification" AI-generated using NotebookLM. Modified by Emalee Mackenzie, Irvine Valley College. Licensed under CC BY-NC-SA
Attribution: "Preventing Cell Culture Contimination'" AI-generated using NotebookLM. Modified by Emalee Mackenzie, Irvine Valley College. Licensed under CC BY-NC-SA
This page titled 5.10: Preventing Contamination Between Cell Lines was last modified on Wed, 21 Oct 2026 01:36:00 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.
The book could not be loaded just now.