11.7: Fixing and Preparing Cells for Staining

Cell Culture Textbook (Biot 77 IVC) · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    11.7: Fixing and Preparing Cells for Staining

    Fixation is a treatment that preserves selected cell structures for later examination. Chemical fixation generally ends the sample’s ability to continue as a living culture. A fixed image records a prepared state at a particular time. It cannot show what the same cells would do later in culture.

    Different fixation methods preserve different features. Crosslinking fixatives stabilize structures by forming chemical links, while some alcohol-based methods precipitate material and can extract components. A method suitable for cell shape may reduce antibody recognition of a target. Follow a method that has been evaluated for the intended specimen and label.

    Permeabilization makes membranes accessible to reagents that do not readily enter intact cells. It is often needed for antibodies directed at intracellular targets. Excessive treatment can remove material or change structure. A surface-labeling experiment may have different requirements from a nuclear-labeling experiment.

    Blocking is a treatment intended to reduce unwanted binding of labeling reagents. It reduces background under suitable conditions but does not prove target specificity. Washing removes unbound or loosely retained reagent. Gentle handling matters because cells can be lost during aspiration, rinsing, and mounting.

    Record the fixative, concentration, exposure time, temperature, and the order of preparation steps. Also record permeabilization and blocking conditions. Two samples stained with the same antibody can look different because they were prepared differently. Sample preparation is part of the measurement rather than a neutral step outside it.

    For adherent samples, avoid disturbing the layer. For suspension samples, the preparation may require retaining cells on a suitable surface or collecting them during washes. Cell loss during this process can select which cells remain visible. Do not assume an adherent-cell wash method will preserve a suspension population.

    Use the required controls and chemical-handling measures for each reagent. A biological safety cabinet is not a general substitute for chemical fume control. Follow the safety data sheet and laboratory procedure for fixatives and solvents, including waste collection. Preserve biological containment requirements where they still apply.


    This page titled 11.7: Fixing and Preparing Cells for Staining was last modified on Wed, 21 Oct 2026 01:35:54 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.