9.7: Controlled Cooling and Transfer

Cell Culture Textbook (Biot 77 IVC) · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    9.7: Controlled Cooling and Transfer

    Cooling rate is the change in sample temperature per unit time. Many mammalian-cell procedures use a rate near 1 °C per minute, but the selected rate and cooling program must suit the cells and medium. A freezer’s set temperature does not tell you the rate at which a vial cools.

    A controlled-rate freezing device is equipment designed to produce a specified cooling process. A programmable freezer uses an active program. A passive freezing container moderates heat transfer when used in its specified environment. Its performance depends on following its instructions, which may cover starting temperature, vial arrangement, container maintenance, and freezer conditions.

    Placing an unprotected vial directly on a −80 °C shelf does not establish the intended cooling rate. Likewise, improvising insulation is not equivalent to a qualified device. Record the equipment identity and program or container method so a later reviewer can understand how the batch was cooled.

    Intermediate storage is a temporary stage between the initial cooling process and the final storage destination. Some procedures use a −80 °C freezer during that stage. The permitted duration and transfer timing belong to the cell-specific procedure. A temporary freezer location should remain visible in the record until the batch reaches its assigned long-term position.

    Plan the transfer route and destination before retrieving the batch. Avoid unplanned warming during movement or a long search through open storage racks. Use the approved transfer equipment and trained handling procedure. Record the actual date and time, destination, and any delay or temperature concern.

    Attribution: "Tissue Culture Sereies#1: How to Thaw Cells with high Efficiency" MilliporeSigma https://www.youtube.com/watch?v=ImZGaZWNzoQ Stand YouTube License. No changes made.


    This page titled 9.7: Controlled Cooling and Transfer was last modified on Wed, 21 Oct 2026 01:35:40 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.