4.2: Procedure

Principles of Biology II (Lab Manual) [BIS 151] · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    4.2: Procedure

    Part I: Prepared Slides

    1. Select four specimens from the prepared slides provided (e.g., Amoeba, Paramecium, Foraminifera, Spirostomum, Vorticella, Trichomonas, Radiolaria, etc.).
    2. Observe each of the selected slides. View the slide first at low power (with the 10x objective lens) before increasing the magnification to high power (with the 40x objective lens). Provide a sketch and description of your observations in the space provided.
    3. Using outside resources such as your textbook and the internet, provide some additional information regarding each of the specimens observed (e.g., ecological or clinical significance, habitat, distribution, interesting behaviors or features, etc.).

    Part II: Pond Water Samples

    1. Obtain a sample of pond water and prepare a wet mount using both a traditional glass slide as well as a deep-welled slide to view in the microscope.
    2. To prepare a wet mount using a traditional glass slide simply place a drop of the pond water in the middle of the slide, place a cover slip over the sample. View the slide first at low power (with the 10x objective lens) before increasing the magnification to high power (with the 40x objective lens)-when possible. Provide a sketch and description of your observations in the space provided.
    3. Once you are done viewing the slide, you can discard the used slide in the container provided.
    4. To prepare the deep well slide for your observations, first remove the circular cover slip, and add 3-4 drops of pond water. You may also want to add 1-2 drops of Proto-Slo to your slide to slow down fast-moving organisms for better viewing. Replace the cover slip, making sure that it clicks into place prior to viewing with the 10x objective lens. An important thing to note is that it is often difficult to observe the deep well slide using anything higher than the 10x objective lens.
    5. Once you are done viewing the slide, you should remove the cover slip and rinse both the coverslip as well as the slide. Set aside to dry before returning to the tray of clean deep-well slides.
      Note
      • You may also want to add a drop of Proto-Slo to the slide prior to adding the cover slip to slow down fast-moving organisms for better viewing. You may have difficulty viewing specimens that do not have natural pigmentation as they tend to get “washed out” by the light of the microscope; adjust the level of your lamp as well as the iris diaphragm accordingly.
      • Try to observe samples from the water column as well as the sediment on the bottom of the container to get a diverse mix of organisms to view.
      • You may need to prepare a few different slides before you feel like you have gotten a good mix of pond water creatures to view.
    6. Use the Pond Identification Sheet and Protist Field Guide to identify four different organisms (at least 3 must be protists!!). Provide sketches and detailed observations of these organisms below. Observations should be made using the 40x objective lens when possible. The Classification of the organism should reflect the general type of organism (e.g., protist, animal, plant, bacteria).

    This page titled 4.2: Procedure was last modified on Tue, 09 Dec 2025 17:47:25 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Beth Cliffel.