6.2: Common-cause and special-cause variation

Quality and Regulatory Compliance in Bioscience · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    6.2: Common-cause and special-cause variation

    Common-cause variation comes from the usual collection of conditions built into a process. Individual results differ, but their overall pattern can remain reasonably consistent. Special-cause variation arises when an unusual influence changes that pattern. These categories help guide investigation and response.

    Common does not mean harmless, small, or acceptable. A filling process may routinely vary more than customers can tolerate. Special does not necessarily mean a large numerical difference. A modest but sustained shift can be important when the process previously varied within a narrow range.

    Common and special cause variation.pngFor the hypothetical filling line, common causes might include the combined small differences in valve timing and routine operating conditions. A damaged seal or a newly introduced setup error might produce a special cause. These are possible explanations, not labels that can be assigned from an equipment name alone. Their classification depends on evidence about the particular process. 

    A condition should not be called a common cause merely because it happens often. For example, a daily rise and fall in room temperature could produce a repeating cycle in fill results. Such a cycle can signal a problem on a standard chart even though it is familiar. The team should investigate and improve the conditions or justify a monitoring method that accounts for them. A sudden heating-system failure presents a different investigation. Classification depends on the process and monitoring approach.

    A signal does not identify its cause automatically. If a result changes after a new reagent lot arrives, the timing makes the lot worth investigating. It does not prove that the lot caused the change. A method revision, instrument problem, or sample-handling change may have occurred at the same time.

    Employees contribute valuable observations, especially about events near a signal. They should report what they observed and distinguish facts from possible explanations. The aim is to understand the process and protect the people who depend on its output, while holding individuals responsible for their actual decisions and actions.


    This page titled 6.2: Common-cause and special-cause variation was last modified on Fri, 06 Nov 2026 23:25:00 GMT and is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.