3.2: Shewhart’s contributions and the PDCA improvement cycle

Quality and Regulatory Compliance in Bioscience · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    3.2: Shewhart’s contributions and the PDCA improvement cycle

    Shewhart’s Guide to Process Variation.pngWalter A. Shewhart helped establish a scientific approach to quality control. His work connected statistical reasoning with industrial decisions, and he is especially associated with the control chart. Variation means differences among repeated results. Some differences are expected in a process; others may signal that conditions have changed.

    A control chart displays process results over time with a center line and statistically derived limits. It helps users evaluate process behavior. Those limits describe process behavior and are different from the acceptance limits set for a product. A chart does not automatically prove that every result meets customer requirements.

    Imagine that the medium company records the proportion of unreadable labels each day. Staff must respond to unacceptable labels under the approved procedure. To improve the process, the team also examines the longer pattern and relevant changes in materials or equipment. One unusually poor day does not by itself prove a special cause or identify who caused it. Adjusting settings after every fluctuation can make the process less predictable.

    Shewhart’s work influenced later learning cycles. Plan-do-check-act, or PDCA, organizes a repeating process of planning a change, trying it, examining results, and deciding what to do next. Deming emphasized plan-do-study-act, or PDSA, with particular attention to comparing results with predictions and building knowledge. The cycles are related, but their names should not be treated as interchangeable when describing Deming’s teaching. Neither name means that Shewhart alone invented the modern PDCA form. 

    A useful cycle begins with a question and a prediction. For example: Will a different approved printer setting reduce smearing without making batch numbers harder to read? Define an unreadable label consistently and compare unreadable labels with the total examined under comparable handling conditions. The worked example below is hypothetical. The trial needs the applicable approvals, and its improvement target does not replace existing acceptance requirements.

    If the trial does not improve results, the team should review what was tested and what the evidence supports. The result may prompt investigation of storage conditions or label materials, but it does not prove either caused the problem. Revise the question and plan another justified test. A limited trial also cannot establish long-term performance by itself.


    This page titled 3.2: Shewhart’s contributions and the PDCA improvement cycle was last modified on Fri, 06 Nov 2026 09:09:55 GMT and is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.