11.7: Current Good Manufacturing Practice

Quality and Regulatory Compliance in Bioscience · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    11.7: Current Good Manufacturing Practice

    Current Good Manufacturing Practice (cGMP) How to Read a CFR Citation 1.png

    Quality starts with how a product is made. A finished-product test can show whether a sample meets a specification, but it gives only part of the picture. Manufacturers also need to control the steps that affect product quality and keep records that show what happened during production.

    Where to find cGMP requirements

    The requirements a manufacturer follows depend on what it makes. Title 21 of the Code of Federal Regulations (CFR) includes several examples.

    What cGMP looks like in practice

    Manufacturers use suitable facilities, equipment, procedures, and trained personnel to keep production under control. The controls should fit the product and its risks so that each batch can consistently meet applicable requirements and specifications. Production records show what was done, who did it, when it happened, and what the results were. Those records help reviewers check whether the process worked as intended and investigate problems when it did not.

    The word cHow to Read a CFR Citation 2.pngurrent matters because manufacturing methods and technology change. Regulations often specify what manufacturers must control while leaving room to choose a method vetted by scientific evidence. A control can help a manufacturer meet a requirement even when the CFR leaves its technical details open. Whether a practice is legally required depends on the law and regulations that apply. FDA guidance can help explain the agency’s expectations, and draft guidance is issued for comment. Binding requirements come from applicable law and regulations.

    Consider a biotechnology company that uses chromatography to purify a therapeutic protein. The team uses development data to justify operating limits, such as the acceptable flow rate. It qualifies the equipment for its intended use and validates the process as appropriate. During production, staff follow controls that reduce contamination risk and record the conditions used for each batch. When the quality team reviews the batch, it can look at both the final test results and the evidence that the purification step stayed within its limits.


    This page titled 11.7: Current Good Manufacturing Practice was last modified on Mon, 09 Nov 2026 04:50:30 GMT and is shared under a CC BY-SA 4.0 license and was authored, remixed, and/or curated by Emalee MacKenzie.