18.3: Pull Sheets/Materials

Bio 4A+4B Lab Instructor Resources Manual · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    Read aloud

    How

    Speed: 1×
    Light up
    Highlight

    Symbols: Mulberry Symbols, © 2018–2026 Steve Lee, CC BY-SA 4.0 (licence, the set), the site's own copies.

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    18.3: Pull Sheets/Materials

    DAY 1

    LIVE MATERIAL

    Escherichia coli - MM294 - 2 slants (or plates)

    • Carolina #21-1530
    • Give to Micro tech when they arrive. They will need to make a total of 12 E. coli streak plates for this lab (we need 6 streak plates per section)
    • Note: this is not the same E. coli we use in Biol74 – this MM294 strain takes up plasmids more readily

    Plasmid pAmp – need 2

    • Carolina #21-1430
    • (if we have enough $, can we order 1 extra to account for student pipetting errors? – if not, that is okay – cost is $188/tube)

     

    EQUIPMENT

     Item How many?
    Gloves (s, m, l) 1 box of each
    Goggles 30
    Inoculating loops 6 (prefer 12 if available)
    Spreading rods  6 (prefer 12 if available)
    Bunsen burners 6
    Strikers for Bunsen burners 6
    Eppendorf tube racks 6
    Plastic beakers for ethanol 6

    Ice buckets OR

    Dyna Chill ™ lab coolers (frozen before lab)

     

    7 (6 for students, 1 for instructor plasmids)

    Hot water bath – set to 42°C

    with trays in water bath to hold microcentrifuge tubes

     

    1

    P20 micropipettes  (0-20ul) 6
    P100 micropipette s (measure to100ul)   6
    P200 micropipettes (measure to 200ul 6
    Sterile micropipette tips (fit to micropipettes above) 6 boxes of each type
    Sterile microcentrifuge tubes 40

    Large waste beakers or jars

    Each labeled “Used Eppendorf Tubes & Pipette Tips”

     

    3 (one per bench)

     

    CHEMICALS & SOLUTIONS

     Item How many?

    2.0 ml 0.05 M CaCl2 – in 250 µl Eppendorf tubes

    At least 250uL 0.05 M CaCl2 in each Eppendorf tube x 28 Eppendorf tubes (14 per section)

     

    8 - keep cold & sterile

    95% Ethanol - keep cold 200 ml in 2 Erlenmeyer flasks

    2.0 ml Luria broth – in 250 µl Eppendorf tubes

    At least 250uL Luria broth in each Eppendorf tube x 28 Eppendorf tubes (14 per section)

     

    8 - keep cold & sterile

    LB/Amp agar plates     

    Carolina #21-6621 (ready to pour, give to micro tech)

     

    need 28 plates across 2 lab sections

    LB agar plates (micro tech may be able to make)

    need 28 plates across 2 lab sections
    Spray cleaner or wavicide 3 bottles
    Paper towels 3 rolls (or use those available in the lab room)

     

    Note:  After lab: Incubate inoculated Petri dishes at 37° C for 24 hours; then move to 5° C cooler.

     

    DAY 2

     Item How many?
    Spray cleaner or wavicide 3 bottles
    ‘Scotch’ (clear) tape or glue sticks (make sure they are fresh) 15

    This page titled 18.3: Pull Sheets/Materials was last modified on Tue, 27 Aug 2024 07:44:32 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Darcy Ernst, May Chen, Katie Foltz, and Bridget Greuel (Open Educational Resource Initiative at Evergreen Valley College) .