Learn · NPTEL

Course12310500660 lectures

Underground Mining of Metalliferous Deposits

Prof. Bibhuti Bhusan Mandal and Prof. Kaushik Dey · IIT Kharagpur

Start with lecture 1 At NPTEL

About

Underground Metal Mining (Underground mining of metalliferous deposits) -

(i) Introduction to Metalliferous mineral deposits, exploration, deposit characterizations, understanding cut-off grade, dilution, optimum recovery, financial impacts etc.

(ii) Access to mineral deposits: Types of access and selection criteria, location, size and shape; Adits, Inclines, Declines, Shafts; Conventional and special methods of excavation, lining, deepening and widening.

(iii) Lateral and inclined development of openings to mineral blocks; Levels, Drive, Drift, Crosscuts, Raising and Winzing etc.

(iv) Classification and choice of stoping methods, Methods of stoping: open stoping, supported stoping – breast, underhand and overhand stoping, shrinkage stoping, cut and fill stoping method, sub-level stoping; Introduction to caving methods: top slicing, sub-level caving, block caving; Stope mechanization and level interval.

(v) Support: Rock bolting, Cable Bolting, Pillar Design; Backfilling: preparation, transportation of mill tailings and filling operation.

(vi) Safety, Environmental issues and Case studies.

INTENDED AUDIENCE : Students of Mining Engineering, Mining Machinery, Mineral Processing,Earth Sciences (Geology/geophysics etc.)

INDUSTRIES SUPPORT : All the Mining and allied industries

Lectures

Week 1:

  1. Lecture-01 : Metals and Civilisation YouTube
  2. Lecture-02 : Mine Life Cycle YouTube
  3. Lecture-03 : Present Status of Mineral Deposits YouTube
  4. Lecture-04 : Present Status of Underground Mining YouTube
  5. Lecture-05 : Terminology - I YouTube

Week 2:

  1. Lecture-06 : Terminology - II YouTube
  2. Lecture-07 : Determination of Cut Off Grade - I YouTube
  3. Lecture-08 : Determination of Cut Off Grade - II YouTube
  4. Lecture-09 : Determination of Cut Off Grade - III YouTube
  5. Lecture-10 : Dilution YouTube

Week 3:

  1. Lecture-11 : Recovery YouTube
  2. Lecture-12 : Adit - I YouTube
  3. Lecture-13 : Adit - II YouTube
  4. Lecture-14 : Incline Shaft YouTube
  5. Lecture-15 : Shaft - I YouTube

Week 4:

  1. Lecture-16 : Shaft - II YouTube
  2. Lecture-17 : Shaft - III YouTube
  3. Lecture-18 : Horizontal Drivages - I YouTube
  4. Lecture-19 : Horizontal Drivages - II YouTube
  5. Lecture-20 : Horizontal Drivages - III YouTube

Week 5:

  1. Lecture-21 : Horizontal Drivages - IV YouTube
  2. Lecture-22 : Raising and Winzing - I YouTube
  3. Lecture-23 : Raising and Winzing - II YouTube
  4. Lecture-24 : Raising and Winzing - III YouTube
  5. Lecture-25 : Raising and Winzing - IV YouTube

Week 6:

  1. Lecture-26 : Selection of Mining Methods - I YouTube
  2. Lecture-27 : Selection of Mining Methods - II YouTube
  3. Lecture-28 : Selection of Mining Methods - III YouTube
  4. Lecture-29 : Selection of Mining Methods - IV YouTube
  5. Lecture-30 : Selection of Mining Methods - V YouTube

Week 7:

  1. Lecture-31 : Breast Stoping YouTube
  2. Lecture-32 : Sampling Practices YouTube
  3. Lecture-33 : Stope and Pillar - I YouTube
  4. Lecture-34 : Stope and Pillar - II YouTube
  5. Lecture-35 : Room and Pillar Mining - I YouTube

Week 8 :

  1. Lecture-36 : Room and Pillar Mining - II YouTube
  2. Lecture-37 : Tributary area method YouTube
  3. Lecture-38 : Pillar Failure YouTube
  4. Lecture-39 : Shrinkage Stoping - I YouTube
  5. Lecture-40 : Shrinkage Stoping - II YouTube

Week 9:

  1. Lecture-41 : Cut & Fill stoping - I YouTube
  2. Lecture-42 : Cut & Fill stoping - II YouTube
  3. Lecture-43 : Cut & Fill stoping - III [Post Pillar Method] YouTube
  4. Lecture-44 : Backfill Materials YouTube
  5. Lecture-45 : Backfill Materials - II YouTube

Week 10:

  1. Lecture-46 : Rock Bolting - I YouTube
  2. Lecture-47 : Rock Bolting - II YouTube
  3. Lecture-48 : Cable Bolting YouTube
  4. Lecture-49 : Sublevel Stoping YouTube
  5. Lecture-50 : Long Hole Stoping YouTube

Week 11:

  1. Lecture-51 : Resuing Method of Stoping YouTube
  2. Lecture-52 : Square Set Stoping YouTube
  3. Lecture-53 : Vertical Crater Retreat Method – I YouTube
  4. Lecture-54 : Vertical Crater Retreat Method – II YouTube
  5. Lecture-55 : Sublevel Caving – I YouTube

Week 12:

  1. Lecture-56 : Sublevel Caving – II YouTube
  2. Lecture-57 : Block Caving – I YouTube
  3. Lecture-58 : Block Caving – II YouTube
  4. Lecture-59 : Safety in U/G Metal Mines – I YouTube
  5. Lecture-60 : Safety in U/G Metal Mines - II YouTube

Syllabus and materials

At NPTEL, as the course publishes them.

Credits and licence

Institution
IIT Kharagpur
Department
Mining Engineering
Taught by
Prof. Bibhuti Bhusan Mandal, Prof. Kaushik Dey
Level
Undergraduate
Language
English
Subjects
Engineering
Source
NPTEL
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed