Learn · NPTEL

Course11310407541 lectures

Fundamentals of Material Processing - Part 2

Prof. Shashank Shekhar and Prof. Anshu Gaur · IIT Kanpur

Start with lecture 1 At NPTEL

Lectures

Week-1: Stress and Strain Analysis and Yield Criteria

  1. Lecture-1: Introduction to Metal Working Video
  2. Lecture-2: Continuum Mechanics Video
  3. Lecture-3: Stress Invariants Video
  4. Lecture - 4: Strain Tensors and Mohr circle for strains Video
  5. Lecture-5: Yield Stress Criterion Video

Week-2: Plastic Instability and Superplasticity

  1. Lecture-6: Effective Stress and Strain Video
  2. Lecture-7: Work Hardening and Flow Behaviour Video
  3. Lecture-8: Effect of Strain Rate Video
  4. Lecture-9: Combined Effect of Strain, Strain Rate and Temperature Video
  5. Lecture-10: Effect of Temperature Video

Week-3: Mechanics of metal working

  1. Lecture-11: Cold, Warm and Hot Working Video
  2. Lecture-12: Mechanics of Metal Working Video
  3. Lecture-13: Wire Drawing Video
  4. Lecture-14: Wire Drawing: Contd... Video
  5. Lecture-15: Hodographs Video

Week-4: Friction and Formability and Case Studies

  1. Lecture 16: Upper-Bound Analysis Video
  2. Lecture 17: Plane Strain Indentation Video
  3. Lecture 18: Strain Calculation Models and Friction Video
  4. Lecture 19: Types of Friction Video
  5. Lecture 20: Effect of Friction in Rolling Video

Week-5: Introduction to vacuum Technology, Physical Vapour Deposition- Evaporation

  1. Lecture-21: Vacuum Technology Video
  2. Lecture-22: Vacuum Technology continued... Video
  3. Lecture-23: Thermal Evaporation Video
  4. Lecture-24: Thermal Evaporation continued... Video
  5. Lecture-25: Thermal Evaporation continued... Video

Week-6: Introduction to Plasma, Physical Vapour Deposition- Sputtering

  1. Lesson-26: Plasma Physics Video
  2. Lesson-27: Plasma Physics continued... Video
  3. Lecture-28: Sputtering Video
  4. Lecture-29: Sputtering continued.... Video
  5. Lecture-30: Sputtering continued.... Video

Week-7: Chemical Vapour Deposition- LPCVD, PECVD, MOCVD

  1. Lecture-31: Chemical Vapor Deposition Video
  2. Lecture-32: Chemical Vapor Deposition continued... Video
  3. Lecture-33: Chemical Vapor Deposition continued... Video
  4. Lecture-34: Chemical Vapor Deposition continued... Video
  5. Lecture-35: Epitaxy, Molecular Beam Epitaxy and Atomic Layer Deposition Video

Week-8: Nucleation and Growth of Thin Films, Special Techniques and Applications

  1. Lecture-36: Adsorption and Nucleation Video
  2. Lecture-37: Thin Film Growth Video
  3. Lecture-38: Kinetics of Thin Film Growth Video
  4. Lecture-39: Thin Film Morphology- Zone Structure Model Video
  5. Lecture-40A: Thin Film Characterization Video
  6. Lecture-40B: Thin Film Characterization Video

Syllabus and materials

At NPTEL, as the course publishes them.

Credits and licence

Institution
IIT Kanpur
Department
Metallurgy and Material Science
Taught by
Prof. Shashank Shekhar, Prof. Anshu Gaur
Level
Undergraduate
Language
English
Subjects
Engineering
Source
NPTEL
Licence
CC BY-NC-SA, as NPTEL states it. Non-commercial use only. NPTEL's terms
Attribution
NPTEL states: "Distributed under Creative Commons Attribution-ShareAlike / CC BY - NC - SA", beside a BY-NC-SA badge.
Who can watch
NPTEL gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed