About
In this lecture we first discuss the requirements of the magnets in terms of aperture and beam size, the relations between dipole field and accelerator energy, and conditions of beam stability on the quadrupole gradient. We then show how the superconducting technology enables a technological leap, with current densities in the windings 100 times larger than what can be achieved with resistive conductors. It took more than 50 years from the superconductivity discovery to the construction of sc magnets in the range of a few tesla: we will briefly outline the obstacles that had to be overcome, leading to the development of cables made of multifilamentary strands embedded in a copper matrix. A low-temperature superconductor can provide dipole fields up to 9 T (Nb-Ti) and 16 T (Nb3Sn). We conclude by outlining two areas in which superconducting magnets for accelerators reach the technological limit: the management of forces and stresses induced by electromagnetic forces and the challenges related to the magnet protection
0:00:00 Slide 1
0:01:57 Slide 2
0:03:04 Slide 3
0:04:36 Slide 4
0:06:13 Slide 5
0:09:07 Slide 6
0:11:12 Slide 7
0:14:37 Slide 8
0:16:03 Slide 9
0:17:21 Slide 10
0:18:23 Slide 11
The talk
Credits and licence
- Institution
- CERN
- Department
- CAS - CERN Accelerator School
- Speaker
- Ezio Todesco
- Year
- 2024
- Level
- Graduate
- Language
- English
- Subjects
- Physics
- Source
- CERN
- Licence
- CERN, as CERN states it. CERN's terms
- Attribution
- © CERN. CERN provides its audiovisual media free of charge for educational and informational use, credited to CERN; this lecture is shown in CERN's own player.
- Who can watch
- CERN gives no rating. Invisible Network shows it to Tweens profiles and older, judged from what the source says about it. How courses are placed