About
This unit belongs to the fourth part of the course, which is focussed on magnet design. We first discuss the lay out of the strand, and the technologies for Nb-Ti and Nb3Sn. We then present the concept of the Rutherford cable, with main design parameters as keystone angle and compaction factor, presence of core, copper fraction, diameter. We give a review of the main parameters used in Nb-Ti and Nb3Sn cables. We also briefly outline the cable in conduit used for fusion magnets and the stabilized cables for high energy physics experimental magnets. We finally outline the strategies for cable insulation for Nb-Ti and for Nb3Sn. We conclude with a review of strands and cables parameters used for accelerator magnets. .
0:07:22 Slide 1
0:14:44 Slide 2
0:22:07 Slide 3
0:29:29 Slide 4
0:36:52 Slide 5
0:44:14 Slide 6
0:51:36 Slide 7
0:58:59 Slide 8
1:06:21 Slide 9
1:13:44 Slide 10
The talk
Credits and licence
- Institution
- CERN
- Department
- Masterclass - Superconducting Accelerator Magnets
- Speaker
- Ezio Todesco
- Year
- 2020
- Language
- English
- Source
- CERN
- Licence
- CERN, as CERN states it. CERN's terms
- Attribution
- © CERN. CERN provides its audiovisual media free of charge for educational and informational use, credited to CERN; this lecture is shown in CERN's own player.
- Who can watch
- CERN gives no rating. Invisible Network shows it to Teens profiles and older, judged from what the source says about it. How courses are placed