1.8: Machined Features

Basic Blueprint Reading · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    The machined features in this section are common terms related to basic industry processes. These terms are often found on prints. For a better understanding of these processes, look at the models of machined features in the Print Reading Lab.

    Bevel

    A surface cut at an angle. In regard to welding, a bevel will normally end up being a surface prep for a weld.

    Block with a 45 degree but for welding called a bevel.

    Boss

    A circular pad on forgings or castings, which project out from that body of the part. The surface of the boss is machined smooth for a bold head to seat on and it has a hole drilled through to accommodate the bolt shank.

    Piece of metal with a raised surface for welding called a boss.

    Chamfer

    A process of cutting away a sharp external corner or edge. Not for welding.

    Block cut at an angle to remove the sharp edge.

    Counterbore

    To enlarge drilled hole to a given diameter and depth. Usually done for recessing a bolt head.

    Block of material showing an example of a counterbore.

    Countersink

    To machine a conical depression in a drilled hole for recessing flathead screws or bolts.

    Part with a countersink hole to accommodate a tapered screw..

    Dovetail

    A slot of any depth and width, which has angled sides.

    Image showing a dovetail cut in a piece of material.

    Quiz

    Directions: Name the machined features shown below.

    graphic quiz for identification of surfaces and holes.

    Fillet

    A small radius filling formed between the inside angle of two surfaces.

    Material showing a fillet.

    Kerf

    The narrow slot formed by removing material while sawing or other machining.

    Material showing a kerf

    Keyway

    A narrow groove or slot cut in the shaft hole of a sleeve or hub for accommodating a key.

    Keyseat

    A narrow groove or slot cut in a shaft for accommodating a key.

    Image showing a keyseat.

    Knurl

    To uniformly roughen with a diamond or straight pattern a cylindrical or flat surface.

    Example of different knurl types.

    Lug

    A piece projecting out from the body of a part. Usually rectangular in cross section with a hole or slot in it.

    Showing a lug welded onto a piece of material for purpose of attachment.

    Neck

    To machine a narrow groove on a cylindrical part or object.

    Shows cuts made on a lathe into a piece of round stock.

    Quiz

    Directions: Name the machined features shown below. Check your answer.

    Visual quiz to identify the surfaces discussed.

    Additional features and shapes.

    Pad

    A slightly raised surface projecting out from the body of a part. The pad surface can be of any size or shape. (Remember, bosses can only be round)

    Shows a pad welded onto a part.

    Round

    A small radius rounded outside corner formed between two surfaces.

    Show the rounding off of a sharp edge.

    Spline

    A gear-like serrated surface on a shaft. Take the place of a key when more torque strength is required.

    A gear shape.

    Spotface

    A round surface on a casting or forging for a bold head. Usually about 1/16” deep.

    A round surface on a casting or forging for a bold head.

    T-Slot

    A slot of any dimensions to resemble a “T”.

    A slot of any dimensions to resemble a “T”.

    Quiz

    Directions: Name that machined features shown below. Check your Answers.

    Quiz identifying the surfaces discussed.

    This page titled 1.8: Machined Features was last modified on Sat, 20 Mar 2021 03:16:31 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Ric Costin (OpenOregon) via source content that was edited to the style and standards of the LibreTexts platform.