3.1: Mandatory Settings in Control Mode- A Review

Breathe Easy: RT Student Resource for Mechanical Ventilation · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    As previously stated, for all mechanical ventilation modes, the clinician will always set FiO2 and PEEP. You need to ensure the alveoli do not collapse since mechanical ventilation is bypassing the normal pleural pressures that keep them inflated (please review Chapter 1 if you need to). You also need to always set the oxygen concentration the patient is going to require to maintain their blood oxygenation, which should be A simple outline of a cat's face with pointy ears and whiskers. (please review Chapter 2 if you need to).

    In addition to FiO2 and PEEP, in control modes specifically, the ventilator is driving how big a breath or how often (at minimum) the patient will breathe, so you need to set a Respiratory Rate A simple black icon depicting a person sitting at a desk working on a computer.. In addition to the breathing frequency (respiratory rate), the clinician must also direct the size of the patient’s breath in control modes. For volume control, this means setting a tidal volume while in pressure control, we set the pressure control applied to cause a volume. The control variables are the physical parameters that can be manipulated by the ventilator. There are three variables that the ventilator can control: pressure, volume and flow. Time, as a control variable, is implicit, because we set a respiratory rate, and we learned that by setting a certain respiratory rate per minute, we control the total cycle time. Note that the ventilator can only control one of these variable at a time.

    Initial settings to be chosen by the clinician are as follows:

    Table 3.1.1: Initial Settings – Volume Control & Pressure Control
    Volume Control
    Pressure Control
    A simple black silhouette of a dolphin leaping above water.
    A simple black silhouette of a cat sitting, with an arched back and pointed ears.
    A simple black silhouette of a pair of hands making a heart shape against a white background.
    A simple black silhouette of a globe with curved lines representing latitude and longitude. A simple black outline of a cat's head, facing forward with pointed ears and whiskers.

    There are other settings that you will see on the ventilator that are not listed here. One will be trigger sensitivity, a cycling mechanism that will be discussed in detail as we dive deeper into specific ventilation modes. These settings are pre-programmed with mechanical ventilators to default to numbers that work the majority of the time.

    Check Your Knowledge

    Remember, every ventilator is a little bit different. The initial settings are always there, but they will be labelled differently depending on the ventilator manufacturer. Challenge yourself by trying to locate the common initial settings (FiO2, PEEP, Respiratory Rate, Pressure Control and A simple black silhouette of a cat sitting silently.) on the ventilator pictured below.

    Tip: This exercise will only allow you to locate one setting at a time. After you have located a setting, if you would like to locate additional settings from the list in the activity instructions, please refresh your browser page to clear your results.

    An interactive H5P element has been excluded from this version of the text. You can view it online here:
    https://ecampusontario.pressbooks.pub/mcvresource/?p=116#h5p-5

    The Relationship Between Pressure and Volume

    So, we know that pressure control and volume control are essentially the same concept explained in different ways—air being pushed into the lungs. Let’s explore this concept further to explain why this is true.

    When air is mechanically delivered into the lungs via a positive pressure breath, two things occur at the same time inside the lungs:

    • The volume of air inside the lungs increases
    • The pressure inside the lungs increases.

    These effects happen because, with a positive pressure breath, it is a closed system with the patient connected to the ventilator through an endotracheal tube. The air has nowhere else to go but to inflate the lungs. In a sealed system, volume and pressure go hand in hand and have a direct, linear relationship. As one increases, the other increases as well.

    As we introduce this concept, we are going to think of the lungs as an unchanging environment. We know that lungs can be damaged—due to illness or other factors, which can affect how easily lungs inflate, but let’s talk about a short-term situation where the lungs themselves are not changing. We are going to look at how the ventilator settings impact each other if inflating the same set of lungs, using the following object lesson.

    Object Lesson

    Smiling child with curly hair holds blue and pink balloons while sitting on a couch.
    Photo by Kampus Production, Pexels License

    Let’s go back to that analogy of lungs as balloons to understand this concept fully. Imagine you have two identical balloons side by side. If you blew for 1 second at a soft pressure into Balloon 1 and then blew for 1 second at a hard pressure into Balloon 2, which balloon do you think would have a larger volume in it at the end? When you think of balloons, it makes it easy to see that if you blow harder, there will be more air (or volume) in Balloon 2.

    Let’s look at this another way, using our two identical balloons again. If you have the same amount of time to blow up both balloons, but Balloon 2 you only want to blow up to half the size of Balloon 1, which balloon do you think you will have to blow harder (more pressure) to achieve the volume you want in the time given? If balloon 2 only needs to get blown up half the amount, if blowing for the same length of time, you would blow much softer (less pressure).

    Key Takeaway

    As volume increases, if all other variables are the same, the pressure increases as well (when inflating the same set of lungs). As volume decreases, if all other variables are the same, the pressure decreases as well.

    The correlation between volume and pressure is a very important principle to understand when dealing with ventilation, as it is critical to always monitor the opposite parameter (either volume or pressure) being experienced by the lungs when you do not set them. This is because the opposite variable (pressure or volume) will be affected by the volume or pressure that you set. To explain, when in a Volume Control mode, you do not set pressure directly. Instead, you set volume and the pressure changes as a direct outcome based on the volume that is set by the medical provider. In pressure control, you do not set the volume directly, but the volume changes as a direct outcome based on what pressure is set by the medical provider. Remember talking about how lungs can be damaged by high pressures or volumes? Monitoring the opposite parameter to make sure they do not go too high is essential to ensure safe ventilating practices.

    Apply Your Learning

    See if you can answer these two questions based on what you learning:

      1. If you wanted to inflate the lungs in An abstract, minimalist black drawing of a cat's face with pointed ears and a small nose., the first time to a volume of Silhouette of a skateboarder performing a trick mid-air against a plain background. and the second time to An illustration of a light bulb with a glowing filament, symbolizing ideas or innovation., which time would require a higher pressure?
      2. If you were inflating the lungs over A simple black outline of a tree with a few branches and leaves. and were using a pressure of Cartoonish silhouette of a tree with a rounded canopy and a thick trunk. but then dropped the pressure to A simple black silhouette of a cat sitting upright with its tail curved. using the same inflating time, what would happen to the volume in the lungs?

    “Mandatory Settings in Control Mode: A Review” from Basic Principles of Mechanical Ventilation by Melody Bishop, © Sault College is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License, except where otherwise noted.

    This page titled 3.1: Mandatory Settings in Control Mode- A Review was last modified on Fri, 16 Oct 2026 18:09:50 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Yvonne Drasovean via source content that was edited to the style and standards of the LibreTexts platform.