11.5: Understand Slope of a Line

Prealgebra · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    Be Prepared 11.10

    Before you get started, take this readiness quiz.

    Simplify:
    If you missed this problem, review Example 4.49.

    Be Prepared 11.11

    Divide:
    If you missed this problem, review Example 7.37.

    Be Prepared 11.12

    Simplify:
    If you missed this problem, review Example 4.47.

    As we’ve been graphing linear equations, we’ve seen that some lines slant up as they go from left to right and some lines slant down. Some lines are very steep and some lines are flatter. What determines whether a line slants up or down, and if its slant is steep or flat?

    The steepness of the slant of a line is called the slope of the line. The concept of slope has many applications in the real world. The pitch of a roof and the grade of a highway or wheelchair ramp are just some examples in which you literally see slopes. And when you ride a bicycle, you feel the slope as you pump uphill or coast downhill.

    Use Geoboards to Model Slope

    In this section, we will explore the concepts of slope.

    Using rubber bands on a geoboard gives a concrete way to model lines on a coordinate grid. By stretching a rubber band between two pegs on a geoboard, we can discover how to find the slope of a line. And when you ride a bicycle, you feel the slope as you pump uphill or coast downhill.

    Manipulative Mathematics

    Doing the Manipulative Mathematics activity "Exploring Slope" will help you develop a better understanding of the slope of a line.

    We’ll start by stretching a rubber band between two pegs to make a line as shown in Figure 11.17.

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 4 and the point in column 4 row 2.
    Figure 11.17

    Does it look like a line?

    Now we stretch one part of the rubber band straight up from the left peg and around a third peg to make the sides of a right triangle as shown in Figure 11.18. We carefully make a angle around the third peg, so that one side is vertical and the other is horizontal.

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style triangle connecting three of the three points at column 1 row 2, column 1 row 4,and column 4 row 2.
    Figure 11.18

    To find the slope of the line, we measure the distance along the vertical and horizontal legs of the triangle. The vertical distance is called the rise and the horizontal distance is called the run, as shown in Figure 11.19.

    This figure shows two arrows. The first arrow is vertical and is labeled “rise”. The second arrow begins at the end of the first arrow extending to the right and is labeled “run”.
    Figure 11.19

    To help remember the terms, it may help to think of the images shown in Figure 11.20.

    ...
    Figure 11.20

    On our geoboard, the rise is units because the rubber band goes up spaces on the vertical leg. See Figure 11.21.

    What is the run? Be sure to count the spaces between the pegs rather than the pegs themselves! The rubber band goes across spaces on the horizontal leg, so the run is units.

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style triangle connecting three of the three points at column 1 row 2, column 1 row 4, and column 4 row 2. The triangle has a rise of 2 units and a run of 3 units.
    Figure 11.21

    The slope of a line is the ratio of the rise to the run. So the slope of our line is In mathematics, the slope is always represented by the letter

    Slope of a line

    The slope of a line is

    The rise measures the vertical change and the run measures the horizontal change.

    What is the slope of the line on the geoboard in Figure 11.21?

    When we work with geoboards, it is a good idea to get in the habit of starting at a peg on the left and connecting to a peg to the right. Then we stretch the rubber band to form a right triangle.

    If we start by going up the rise is positive, and if we stretch it down the rise is negative. We will count the run from left to right, just like you read this paragraph, so the run will be positive.

    Since the slope formula has rise over run, it may be easier to always count out the rise first and then the run.

    Example 11.30

    What is the slope of the line on the geoboard shown?

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 5 and the point in column 5 row 2.
    Answer

    Use the definition of slope.

    Start at the left peg and make a right triangle by stretching the rubber band up and to the right to reach the second peg.

    Count the rise and the run as shown.

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style triangle connecting three of the three points at column 1 row 2, column 1 row 5,and column 5 row 2.

    Try It 11.58

    What is the slope of the line on the geoboard shown?

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 5 and the point in column 4 row 1.

    Try It 11.59

    What is the slope of the line on the geoboard shown?

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 4 and the point in column 5 row 3.

    Example 11.31

    What is the slope of the line on the geoboard shown?

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 3 and the point in column 4 row 4.
    Answer

    Use the definition of slope.

    Start at the left peg and make a right triangle by stretching the rubber band to the peg on the right. This time we need to stretch the rubber band down to make the vertical leg, so the rise is negative.

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style triangle connecting three of the three points at column 1 row 3, column 1 row 4,and column 4 row 4.

    Try It 11.60

    What is the slope of the line on the geoboard?

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 2 and the point in column 4 row 4.

    Try It 11.61

    What is the slope of the line on the geoboard?

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 1 and the point in column 4 row 5.

    Notice that in the first example, the slope is positive and in the second example the slope is negative. Do you notice any difference in the two lines shown in Figure 11.22.

    ...
    Figure 11.22

    As you read from left to right, the line in Figure A, is going up; it has positive slope. The line Figure B is going down; it has negative slope.

    ...
    Figure 11.23

    Example 11.32

    Use a geoboard to model a line with slope

    Answer

    To model a line with a specific slope on a geoboard, we need to know the rise and the run.

    Use the slope formula.
    Replace with .

    So, the rise is unit and the run is units.

    Start at a peg in the lower left of the geoboard. Stretch the rubber band up unit, and then right units.

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style triangle connecting three of the three points at column 1 row 3, column 1 row 4,and column 3 row 3.

    The hypotenuse of the right triangle formed by the rubber band represents a line with a slope of

    Try It 11.62

    Use a geoboard to model a line with the given slope:

    Try It 11.63

    Use a geoboard to model a line with the given slope:

    Example 11.33

    Use a geoboard to model a line with slope

    Answer

    Use the slope formula.
    Replace with .

    So, the rise is and the run is

    Since the rise is negative, we choose a starting peg on the upper left that will give us room to count down. We stretch the rubber band down unit, then to the right units.

    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style triangle connecting three of the three points at column 1 row 2, column 1 row 3,and column 5 row 3.

    The hypotenuse of the right triangle formed by the rubber band represents a line whose slope is

    Try It 11.64

    Use a geoboard to model a line with the given slope:

    Try It 11.65

    Use a geoboard to model a line with the given slope:

    Find the Slope of a Line from its Graph

    Now we’ll look at some graphs on a coordinate grid to find their slopes. The method will be very similar to what we just modeled on our geoboards.

    Manipulative Mathematics

    Example 11.34

    Find the slope of the line shown:

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 6. The y-axis runs from -4 to 2. A line passes through the points “ordered pair 5, 1” and “ordered pair 0, -3”.
    Answer

    Locate two points on the graph, choosing points whose coordinates are integers. We will use and

    Starting with the point on the left, sketch a right triangle, going from the first point to the second point,

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 6. The y-axis runs from -4 to 2. A line passes through the points “ordered pair 5, 1” and “ordered pair 0, -3”. Two line segments form a triangle with the line. A horizontal line connects “ordered pair 0, 1” and “ordered pair 5,1 ”. A vertical line segment connects “ordered pair 0, -3” and “ordered pair 0, 1”.
    Count the rise on the vertical leg of the triangle. The rise is 4 units.
    Count the run on the horizontal leg. The run is 5 units.
    Use the slope formula.
    Substitute the values of the rise and run.
    The slope of the line is .

    Notice that the slope is positive since the line slants upward from left to right.

    Try It 11.66

    Find the slope of the line:

    The graph shows the x y-coordinate plane. The x-axis runs from -8 to 1. The y-axis runs from -1 to 4. A line passes through the points “ordered pair -8, 1” and “ordered pair 0, 3”.

    Try It 11.67

    Find the slope of the line:

    The graph shows the x y-coordinate plane. The x-axis runs from -2 to 6. The y-axis runs from -2 to 4. A line passes through the points “ordered pair 4, 2” and “ordered pair 0, -1”.

    How To

    Find the slope from a graph.

    1. Step 1. Locate two points on the line whose coordinates are integers.
    2. Step 2. Starting with the point on the left, sketch a right triangle, going from the first point to the second point.
    3. Step 3. Count the rise and the run on the legs of the triangle.
    4. Step 4. Take the ratio of rise to run to find the slope.

    Example 11.35

    Find the slope of the line shown:

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 9. The y-axis runs from -1 to 7. A line passes through the points “ordered pair 4, 2” and “ordered pair 3, 3”.
    Answer

    Locate two points on the graph. Look for points with coordinates that are integers. We can choose any points, but we will use (0, 5) and (3, 3). Starting with the point on the left, sketch a right triangle, going from the first point to the second point.

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 9. The y-axis runs from -1 to 7. A line passes through the points “ordered pair 0, 5” and “ordered pair 3, 3”. Two line segments form a triangle with the line. A horizontal line connects “ordered pair 0, 3” and “ordered pair 3, 3 ”. A vertical line segment connects “ordered pair 0, 3” and “ordered pair 0, 5”. It is labeled “rise”.
    Count the rise – it is negative. The rise is −2.
    Count the run. The run is 3.
    Use the slope formula.
    Substitute the values of the rise and run.
    Simplify.
    The slope of the line is

    Notice that the slope is negative since the line slants downward from left to right.

    What if we had chosen different points? Let’s find the slope of the line again, this time using different points. We will use the points and

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 9. The y-axis runs from -1 to 7. A line passes through the points “ordered pair 0, 5” and “ordered pair 3, 3”. .

    Starting at sketch a right triangle to

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 9. The y-axis runs from -1 to 7. A line passes through the points “ordered pair 0, 5” and “ordered pair 3, 3”. Two line segments form a triangle with the line. A vertical line connects “ordered pair 0, 3” and “ordered pair 3, 3 ”. A vertical line segment connects “ordered pair 0, 3” and “ordered pair 0, 5”.
    Count the rise. The rise is −6.
    Count the run. The run is 9.
    Use the slope formula.
    Substitute the values of the rise and run.
    Simplify the fraction.
    The slope of the line is

    It does not matter which points you use—the slope of the line is always the same. The slope of a line is constant!

    Try It 11.68

    Find the slope of the line:

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 5. The y-axis runs from -6 to 1. A line passes through the points “ordered pair 3, -6” and “ordered pair 0, -2”.

    Try It 11.69

    Find the slope of the line:

    The graph shows the x y-coordinate plane. The x-axis runs from -3 to 6. The y-axis runs from -3 to 2. A line passes through the points “ordered pair 5, -2” and “ordered pair 0, 1”.

    The lines in the previous examples had -intercepts with integer values, so it was convenient to use the y-intercept as one of the points we used to find the slope. In the next example, the -intercept is a fraction. The calculations are easier if we use two points with integer coordinates.

    Example 11.36

    Find the slope of the line shown:

    The graph shows the x y-coordinate plane. The x-axis runs from 0 to 7. The y-axis runs from 0 to 8. A line passes through the points “ordered pair 2, 3” and “ordered pair 7, 6”.
    Answer

    Locate two points on the graph whose coordinates are integers. and
    Which point is on the left?
    Starting at , sketch a right angle to as shown below.
    The graph shows the x y-coordinate plane. The x-axis runs from 0 to 7. The y-axis runs from 0 to 8. Two unlabeled points are drawn at “ordered pair 2, 3” and “ordered pair 7, 6”. A line passes through the points. Two line segments form a triangle with the line. A vertical line connects “ordered pair 2, 3” and “ordered pair 2, 6 ”. It is labeled “rise”. A horizontal line segment connects “ordered pair 2, 6” and “ordered pair 7, 6”. It is labeled “run”.
    Count the rise. The rise is 3.
    Count the run. The run is 5.
    Use the slope formula.
    Substitute the values of the rise and run.
    The slope of the line is

    Try It 11.70

    Find the slope of the line:

    The graph shows the x y-coordinate plane. The x-axis runs from -4 to 2. The y-axis runs from -5 to 2. A line passes through the points “ordered pair -3, -4” and “ordered pair 1, 1”.

    Try It 11.71

    Find the slope of the line:

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 4. The y-axis runs from -2 to 3. A line passes through the points “ordered pair 3, 2” and “ordered pair 1, -1”.

    Find the Slope of Horizontal and Vertical Lines

    Do you remember what was special about horizontal and vertical lines? Their equations had just one variable.

    • horizontal line all the -coordinates are the same.
    • vertical line all the -coordinates are the same.

    So how do we find the slope of the horizontal line

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 5. The y-axis runs from -1 to 7. A horizontal line passes through the labeled points “ordered pair 0, 4” and “ordered pair 3, 4”.
    Figure 11.24
    What is the rise? The rise is 0.
    What is the run? The run is 3.
    What is the slope?

    The slope of the horizontal line is

    All horizontal lines have slope . When the -coordinates are the same, the rise is .

    Slope of a Horizontal Line

    The slope of a horizontal line, is

    Now we’ll consider a vertical line, such as the line

    The graph shows the x y-coordinate plane. Both axes run from -5 to 5. A vertical line passes through the labeled points “ordered pair 3, 2” and “ordered pair 3, 0”.
    Figure 11.25
    What is the rise? The rise is 2.
    What is the run? The run is 0.
    What is the slope?

    But we can’t divide by Division by is undefined. So we say that the slope of the vertical line is undefined. The slope of all vertical lines is undefined, because the run is

    Slope of a Vertical Line

    The slope of a vertical line, is undefined.

    Example 11.37

    Find the slope of each line:

    1. ⓐ
    2. ⓑ
    Answer

    ⓐ

    This is a vertical line, so its slope is undefined.

    ⓑ

    This is a horizontal line, so its slope is

    Try It 11.72

    Find the slope of the line:

    Try It 11.73

    Find the slope of the line:

    Quick Guide to the Slopes of Lines

    The figure shows 4 arrows. The first rises from left to right with the arrow point upwards. It is labeled “positive”. The second goes down from left to right with the arrow pointing downwards. It is labeled “negative”. The third is horizontal with arrow heads on both ends. It is labeled “zero”. The last is vertical with arrow heads on both ends. It is labeled “undefined.”

    Use the Slope Formula to find the Slope of a Line between Two Points

    Sometimes we need to find the slope of a line between two points and we might not have a graph to count out the rise and the run. We could plot the points on grid paper, then count out the rise and the run, but there is a way to find the slope without graphing.

    Before we get to it, we need to introduce some new algebraic notation. We have seen that an ordered pair gives the coordinates of a point. But when we work with slopes, we use two points. How can the same symbol be used to represent two different points?

    Mathematicians use subscripts to distinguish between the points. A subscript is a small number written to the right of, and a little lower than, a variable.

    We will use to identify the first point and to identify the second point. If we had more than two points, we could use and so on.

    To see how the rise and run relate to the coordinates of the two points, let’s take another look at the slope of the line between the points

    The graph shows the x y-coordinate plane. The x-axis runs from 0 to 7. The y-axis runs from 0 to 7. A line runs through the labeled points 2, 3 and 7, 6. A line segment runs from the point 2, 3 to the unlabeled point 2, 6. It is labeled y sub 2 minus y sub 1, 6 minus 3, 3. A line segment runs from the point 7, 6 to the unlabeled point 2, 6. It os labeled x sub 2 minus x sub 1, 7 minus 2, 5.
    Figure 11.26

    Since we have two points, we will use subscript notation.

    On the graph, we counted the rise of The rise can also be found by subtracting the of the points.

    We counted a run of The run can also be found by subtracting the

    We know
    So
    We rewrite the rise and run by putting in the coordinates.
    But 6 is the -coordinate of the second point,
    and 3 is the -coordinate of the first point .
    So we can rewrite the rise using subscript notation.
    Also 7 is the -coordinate of the second point,
    and 2 is the -coordinate of the first point .
    So we rewrite the run using subscript notation.

    We’ve shown that is really another version of We can use this formula to find the slope of a line when we have two points on the line.

    Slope Formula

    The slope of the line between two points and is

    Say the formula to yourself to help you remember it:

    Manipulative Mathematics

    Example 11.38

    Find the slope of the line between the points and

    Answer

    We’ll call point #1 and point #2.
    Use the slope formula.
    Substitute the values in the slope formula:
    of the second point minus of the first point
    of the second point minus of the first point
    Simplify the numerator and the denominator.

    Let’s confirm this by counting out the slope on the graph.

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 7. The y-axis runs from -1 to 7. Two labeled points are drawn at “ordered pair 1, 2” and “ordered pair 4, 5”. A line passes through the points. Two line segments form a triangle with the line. A vertical line connects “ordered pair 1, 2” and “ordered pair 1, 5 ”. It is labeled “rise”. A horizontal line segment connects “ordered pair 1, 5” and “ordered pair 4, 5”. It is labeled “run”.

    The rise is and the run is so

    Try It 11.74

    Find the slope of the line through the given points: and

    Try It 11.75

    Find the slope of the line through the given points: and

    How do we know which point to call #1 and which to call #2? Let’s find the slope again, this time switching the names of the points to see what happens. Since we will now be counting the run from right to left, it will be negative.

    We’ll call point #1 and point #2.
    Use the slope formula.
    Substitute the values in the slope formula:
    of the second point minus of the first point
    of the second point minus of the first point
    Simplify the numerator and the denominator.

    The slope is the same no matter which order we use the points.

    Example 11.39

    Find the slope of the line through the points and

    Answer

    We’ll call point #1 and point #2.
    Use the slope formula.
    Substitute the values
    of the second point minus of the first point
    of the second point minus of the first point
    Simplify.

    Let’s confirm this on the graph shown.

    The graph shows the x y-coordinate plane. The x-axis runs from -8 to 2. The y-axis runs from -6 to 5. Two unlabeled points are drawn at “ordered pair -7, 4” and “ordered pair -2, -3”. A line passes through the points. Two line segments form a triangle with the line. A vertical line connects “ordered pair -7, 4” and “ordered pair -7, -3 ”. It is labeled “rise”. A horizontal line segment connects “ordered pair -7, -3” and “ordered pair -2, -3”. It is labeled “run”.

    Try It 11.76

    Find the slope of the line through the pair of points: and

    Try It 11.77

    Find the slope of the line through the pair of points: and

    Graph a Line Given a Point and the Slope

    In this chapter, we graphed lines by plotting points, by using intercepts, and by recognizing horizontal and vertical lines.

    Another method we can use to graph lines is the point-slope method. Sometimes, we will be given one point and the slope of the line, instead of its equation. When this happens, we use the definition of slope to draw the graph of the line.

    Example 11.40

    Graph the line passing through the point whose slope is

    Answer

    Plot the given point,

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 7. The y-axis runs from -3 to 4. A labeled point is drawn at “ordered pair 1, -1”.

    Use the slope formula to identify the rise and the run.

    Starting at the point we plotted, count out the rise and run to mark the second point. We count units up and units right.

    The graph shows the x y-coordinate plane. Both axes run from -5 to 5. Two line segments are drawn. A vertical line segment connects the points “ordered pair 1, -1” and “order pair “1, 2”. It is labeled “3”. A horizontal line segment starts at the top of the vertical line segment and goes to the right, connecting the points “ordered pair 1, 2” and “ordered pair 5, 2”. It is labeled “4”.

    Then we connect the points with a line and draw arrows at the ends to show it continues.

    The graph shows the x y-coordinate plane. The x-axis runs from -3 to 5. The y-axis runs from -1 to 7. Two unlabeled points are drawn at “ordered pair 1, -1” and “ordered pair 5, 2”. A line passes through the points. Two line segments form a triangle with the line. A vertical line connects “ordered pair 1, -1” and “ordered pair 1, 2 ”. A horizontal line segment connects “ordered pair 1, 2” and “ordered pair 5, 2”.

    We can check our line by starting at any point and counting up and to the right We should get to another point on the line.

    Try It 11.78

    Graph the line passing through the point with the given slope:

    Try It 11.79

    Graph the line passing through the point with the given slope:

    How To

    Graph a line given a point and a slope.

    1. Step 1. Plot the given point.
    2. Step 2. Use the slope formula to identify the rise and the run.
    3. Step 3. Starting at the given point, count out the rise and run to mark the second point.
    4. Step 4. Connect the points with a line.

    Example 11.41

    Graph the line with -intercept and slope

    Answer

    Plot the given point, the -intercept

    The graph shows the x y-coordinate plane. The x-axis runs from -1 to 4. The y-axis runs from -1 to 3. The point “ordered pair 0, 2” is labeled.

    Use the slope formula to identify the rise and the run.

    Starting at count the rise and the run and mark the second point.

    The graph shows the x y-coordinate plane. Both axes run from -5 to 5. A vertical line segment connects points at “ordered pair 0, 2” and “ordered pair 0, 0” and is labeled “down 2”. A horizontal line segment connects “ordered pair 0, 0” and “ordered pair 0, 3” and is labeled “right 3”.

    Connect the points with a line.

    The graph shows the x y-coordinate plane. Both axes run from -5 to 5. Two labeled points are drawn at “ordered pair 0, 2” and “ordered pair 3, 0”. A line passes through the points. Two line segments form a triangle with the line. A vertical line connects “ordered pair 0, 2” and “ordered pair 0, 0 ”. A horizontal line segment connects “ordered pair 0, 0” and “ordered pair 3, 0”.

    Try It 11.80

    Graph the line with the given intercept and slope:

    -intercept

    Try It 11.81

    Graph the line with the given intercept and slope:

    -intercept

    Example 11.42

    Graph the line passing through the point whose slope is

    Answer

    Plot the given point.

    The graph shows the x y-coordinate plane. Both axes run from -5 to 5. The point “ordered pair -1, -3” is labeled.
    Identify the rise and the run.
    Write 4 as a fraction.

    Count the rise and run.

    The graph shows the x y-coordinate plane. Both axes run from -5 to 5. The y-axis runs from -4 to 2. A vertical line segment connects points at “ordered pair -1, -3” and “ordered pair -1, 1” and is labeled “up 4”. A horizontal line segment connects “ordered pair -1, 1” and “ordered pair 0, 1” and is labeled “over 1”.

    Mark the second point. Connect the two points with a line.

    The graph shows the x y-coordinate plane. Both axes run from -5 to 5. Two labeled points are drawn at “ordered pair -1, -3” and “ordered pair -1, 1”. A line passes through the points. Two line segments form a triangle with the line. A vertical line connects “ordered pair -1, -3” and “ordered pair -1, 1 ”. It is labeled “up 4” A horizontal line segment connects “ordered pair -1, 1” and “ordered pair 0, 1”. It is labeled “over 1”

    Try It 11.82

    Graph the line passing through the point and with slope

    Try It 11.83

    Graph the line passing through the point and with slope

    Solve Slope Applications

    At the beginning of this section, we said there are many applications of slope in the real world. Let’s look at a few now.

    Example 11.43

    The pitch of a building’s roof is the slope of the roof. Knowing the pitch is important in climates where there is heavy snowfall. If the roof is too flat, the weight of the snow may cause it to collapse. What is the slope of the roof shown?

    This figure shows a house with a sloped roof. The roof on one half of the building is labeled “pitch of the roof”. There is a line segment with arrows at each end measuring the vertical length of the roof and is labeled “rise = 9 feet”. There is a line segment with arrows at each end measuring the horizontal length of the root and is labeled “run = 18 feet”.
    Answer

    Use the slope formula.
    Substitute the values for rise and run.
    Simplify.
    The slope of the roof is .

    Try It 11.84

    Find the slope given rise and run: A roof with a rise and run

    Try It 11.85

    Find the slope given rise and run: A roof with a rise and run

    Have you ever thought about the sewage pipes going from your house to the street? Their slope is an important factor in how they take waste away from your house.

    Example 11.44

    Sewage pipes must slope down inch per foot in order to drain properly. What is the required slope?

    This figure shows a right triangle. The short leg is vertical and is labeled “1 over 4 inch”. The long leg labeled “1 foot”.
    Answer

    Use the slope formula.
    Convert 1 foot to 12 inches.
    Simplify.
    The slope of the pipe is

    Try It 11.86

    Find the slope of the pipe: The pipe slopes down inch per foot.

    Try It 11.87

    Find the slope of the pipe: The pipe slopes down inch per yard.

    Media

    ACCESS ADDITIONAL ONLINE RESOURCES

    Section 11.4 Exercises

    Practice Makes Perfect

    Use Geoboards to Model Slope

    In the following exercises, find the slope modeled on each geoboard.

    203.
    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 1 row 3 and the point in column 5 row 2.
    204.
    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 2 row 4 and the point in column 5 row 2.
    205.
    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 2 row 1 and the point in column 4 row 4.
    206.
    The figure shows a grid of evenly spaced dots. There are 5 rows and 5 columns. There is a rubber band style loop connecting the point in column 2 row 1 and the point in column 4 row 4.

    In the following exercises, model each slope. Draw a picture to show your results.

    207.

    208.

    209.

    210.

    211.

    212.

    213.

    214.

    Find the Slope of a Line from its Graph

    In the following exercises, find the slope of each line shown.

    215.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair 0, -4” and “ordered pair 10, 0”.
    216.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair 0, -5” and “ordered pair 3, 0”.
    217.
    The graph shows the x y-coordinate plane. The x-axis runs from -12 to 12. The y-axis runs from -12 to 12. A line passes through the points “ordered pair 0, -1” and “ordered pair 1, 0”.
    218.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair 0, 3” and “ordered pair 6, 0”.
    219.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair 0, 2” and “ordered pair 6, 0”.
    220.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair 0, 2” and “ordered pair 6, 0”.
    221.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair 0, 6” and “ordered pair 8, 0”.
    222.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair -1, 0” and “ordered pair 0, -1”.
    223.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair -4, 0” and “ordered pair -4, 6”.
    224.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. The y-axis runs from -10 to 10. A line passes through the points “ordered pair -2, 0” and “ordered pair 4, 4”.
    225.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. A line passes through the points “ordered pair 0, 4” and “ordered pair 4, -6”.
    226.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. A line passes through the points “ordered pair -8, 8” and “ordered pair 8, -4”.
    227.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. A line passes through the points “ordered pair 1, 4” and “ordered pair 7, 0”.
    228.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. A line passes through the points “ordered pair 0, 3” and “ordered pair 7, 0”.
    229.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. A line passes through the points “ordered pair 2, 0” and “ordered pair 10, 4”.
    230.
    The graph shows the x y-coordinate plane. The x-axis runs from -10 to 10. A line passes through the points “ordered pair 6, 2” and “ordered pair 0, -3”.

    Find the Slope of Horizontal and Vertical Lines

    In the following exercises, find the slope of each line.

    231.

    232.

    233.

    234.

    235.

    236.

    237.

    238.

    Use the Slope Formula to find the Slope of a Line between Two Points

    In the following exercises, use the slope formula to find the slope of the line between each pair of points.

    239.

    240.

    241.

    242.

    243.

    244.

    245.

    246.

    247.

    248.

    249.

    250.

    Graph a Line Given a Point and the Slope

    In the following exercises, graph the line given a point and the slope.

    251.

    252.

    253.

    254.

    255.

    256.

    257.

    258.

    259.

    260.

    261.

    262.

    263.

    264.

    265.

    266.

    Solve Slope Applications

    In the following exercises, solve these slope applications.

    267.

    Slope of a roof A fairly easy way to determine the slope is to take a level and set it on one end on the roof surface. Then take a tape measure or ruler, and measure from the other end of the level down to the roof surface. You can use these measurements to calculate the slope of the roof. What is the slope of the roof in this picture?

    The figure shows a wood board at a diagonal representing a side-view slice of a pitched roof. A vertical line segment with arrows on both ends measures the vertical change in height of the roof and is labeled “4 inches”. A level tool is in a horizontal position above the board and above it is a line segment with arrows on both ends labeled “12 inches”.
    268.

    What is the slope of the roof shown?

    The figure shows a diagonal side-view slice of a pitched roof. A ruler in vertical position is at the bottom of the roof segment and shows unit labels 1 through 8 and extends one further unit. A second ruler starts at the “7” label of the vertical ruler and extends horizontally until it hits the rising roof. The horizontal ruler has unit labels 1 through 11 and extends one further unit.
    269.

    Road grade A local road has a grade of The grade of a road is its slope expressed as a percent.

    1. ⓐ Find the slope of the road as a fraction and then simplify the fraction.
    2. ⓑ What rise and run would reflect this slope or grade?
    270.

    Highway grade A local road rises feet for every feet of highway.

    1. ⓐ What is the slope of the highway?
    2. ⓑ The grade of a highway is its slope expressed as a percent. What is the grade of this highway?

    Everyday Math

    271.

    Wheelchair ramp The rules for wheelchair ramps require a maximum inch rise for a inch run.

    1. ⓐ What run must the ramp have to accommodate a rise to the door?
    2. ⓑ Draw a model of this ramp.
    272.

    Wheelchair ramp A rise for a run makes it easier for the wheelchair rider to ascend the ramp.

    1. ⓐ What run must the ramp have to easily accommodate a rise to the door?
    2. ⓑ Draw a model of this ramp.

    Writing Exercises

    273.

    What does the sign of the slope tell you about a line?

    274.

    How does the graph of a line with slope differ from the graph of a line with slope

    275.

    Why is the slope of a vertical line undefined?

    276.

    Explain how you can graph a line given a point and its slope.

    Self Check

    ⓐ After completing the exercises, use this checklist to evaluate your mastery of the objectives of this section.

    .

    ⓑ On a scale of 1–10, how would you rate your mastery of this section in light of your responses on the checklist? How can you improve this?

    This page titled 11.5: Understand Slope of a Line was last modified on Sun, 28 May 2023 07:57:59 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by OpenStax.