4.2: Serger

Introduction to Apparel Production Workbook · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    From LibreTexts, under CC BY 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    A. UPPER PART OF SERGER

    1. Machine Table-The table holds the serger machine head and allows for garment space while serging. It also holds the thread cone stand holding 3-4 cones of thread.

    serger-table-282x300.png

    2. Serger Head – The serger head controls the upper threads, thread tensions, and needle and knife housing.

    serger-head-300x225.png

    3. Knife and Needle Area

    serger-knife-254x300.png

    4. Power Switch -The power switch is located under the table edge on the right side of the machine turns on the machine and the light.

    serger-switch-300x151.png

    5. Fabric Shoot -The fabric shoot allows the cut off fabric to be deposited into a waste bin.

    serger-fabric-shoot-300x205.png

    6. Foot Peddle – The foot peddle drives the serger.

    serger-foot-peddle-300x183.png

    7. Presser Foot Lifter -The presser foot lift is located next to the foot peddle. It lifts and lowers the presser foot of the serger.

    serger-presser-foot-lifter-300x225.png

    This page titled 4.2: Serger was last modified on Sun, 24 Nov 2024 20:50:06 GMT and is shared under a CC BY 4.0 license and was authored, remixed, and/or curated by Laurie M. Apple via source content that was edited to the style and standards of the LibreTexts platform.