10: Moments of Inertia

Engineering Statics: Open and Interactive · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    \(\require{cancel} \let\vecarrow\vec \renewcommand{\vec}{\mathbf} \newcommand{\ihat}{\vec{i}} \newcommand{\jhat}{\vec{j}} \newcommand{\khat}{\vec{k}} \DeclareMathOperator{\proj}{proj} \newcommand{\kg}[1]{#1~\text{kg} } \newcommand{\lbm}[1]{#1~\text{lb}_m } \newcommand{\slug}[1]{#1~\text{slug} } \newcommand{\m}[1]{#1~\text{m}} \newcommand{\km}[1]{#1~\text{km}} \newcommand{\cm}[1]{#1~\text{cm}} \newcommand{\mm}[1]{#1~\text{mm}} \newcommand{\ft}[1]{#1~\text{ft}} \newcommand{\inch}[1]{#1~\text{in}} \newcommand{\N}[1]{#1~\text{N} } \newcommand{\kN}[1]{#1~\text{kN} } \newcommand{\MN}[1]{#1~\text{MN} } \newcommand{\lb}[1]{#1~\text{lb} } \newcommand{\lbf}[1]{#1~\text{lb}_f } \newcommand{\Nm}[1]{#1~\text{N}\!\cdot\!\text{m} } \newcommand{\kNm}[1]{#1~\text{kN}\!\cdot\!\text{m} } \newcommand{\ftlb}[1]{#1~\text{ft}\!\cdot\!\text{lb} } \newcommand{\inlb}[1]{#1~\text{in}\!\cdot\!\text{lb} } \newcommand{\lbperft}[1]{#1~\text{lb}/\text{ft} } \newcommand{\lbperin}[1]{#1~\text{lb}/\text{in} } \newcommand{\Nperm}[1]{#1~\text{N}/\text{m} } \newcommand{\kgperkm}[1]{#1~\text{kg}/\text{km} } \newcommand{\psinch}[1]{#1~\text{lb}/\text{in}^2 } \newcommand{\pqinch}[1]{#1~\text{lb}/\text{in}^3 } \newcommand{\psf}[1]{#1~\text{lb}/\text{ft}^2 } \newcommand{\pqf}[1]{#1~\text{lb}/\text{ft}^3 } \newcommand{\Nsm}[1]{#1~\text{N}/\text{m}^2 } \newcommand{\kgsm}[1]{#1~\text{kg}/\text{m}^2 } \newcommand{\kgqm}[1]{#1~\text{kg}/\text{m}^3 } \newcommand{\Pa}[1]{#1~\text{Pa} } \newcommand{\kPa}[1]{#1~\text{kPa} } \newcommand{\aSI}[1]{#1~\text{m}/\text{s}^2 } \newcommand{\aUS}[1]{#1~\text{ft}/\text{s}^2 } \newcommand{\unit}[1]{#1~\text{unit} } \newcommand{\ang}[1]{#1^\circ } \newcommand{\second}[1]{#1~\text{s} } \newcommand{\lt}{<} \newcommand{\gt}{>} \newcommand{\amp}{&} \)

    Area moments of inertia are a measure of the distribution of a two-dimensional area around a particular axis. Fundamentally, the portions of a shape which are located farther from the axis are more important than the parts which are closer. The primary application is in structural engineering and machine design where they are used to determine a structural member’s stiffness. Another application is in Fluid Mechanics where they are used to determine the effect of pressure on a submerged surface. We will use the symbol \(I\) for this property, along with a subscript to indicate the specific axis, so for example, \(I_x\) would indicate the “Area moment of inertia with respect to the \(x\) axis.”

    Warning 10.0.1.

    The mass moment of inertia you learned about in Physics is not the same as the \(area\) moment of inertia in Statics!

    This can be confusing since both are commonly shortened to “moment of inertia” and both use the same symbol, \(I\text{.}\) They have different units however, and the intended moment of inertia can easily be determined from context or with a unit analysis.

    This page titled 10: Moments of Inertia was last modified on Fri, 17 Sep 2021 11:54:12 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Daniel W. Baker and William Haynes (Engineeringstatics) via source content that was edited to the style and standards of the LibreTexts platform.