6: Equilibrium of Structures — Read

From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

\(\require{cancel} \let\vecarrow\vec \renewcommand{\vec}{\mathbf} \newcommand{\ihat}{\vec{i}} \newcommand{\jhat}{\vec{j}} \newcommand{\khat}{\vec{k}} \DeclareMathOperator{\proj}{proj} \newcommand{\kg}[1]{#1~\text{kg} } \newcommand{\lbm}[1]{#1~\text{lb}_m } \newcommand{\slug}[1]{#1~\text{slug} } \newcommand{\m}[1]{#1~\text{m}} \newcommand{\km}[1]{#1~\text{km}} \newcommand{\cm}[1]{#1~\text{cm}} \newcommand{\mm}[1]{#1~\text{mm}} \newcommand{\ft}[1]{#1~\text{ft}} \newcommand{\inch}[1]{#1~\text{in}} \newcommand{\N}[1]{#1~\text{N} } \newcommand{\kN}[1]{#1~\text{kN} } \newcommand{\MN}[1]{#1~\text{MN} } \newcommand{\lb}[1]{#1~\text{lb} } \newcommand{\lbf}[1]{#1~\text{lb}_f } \newcommand{\Nm}[1]{#1~\text{N}\!\cdot\!\text{m} } \newcommand{\kNm}[1]{#1~\text{kN}\!\cdot\!\text{m} } \newcommand{\ftlb}[1]{#1~\text{ft}\!\cdot\!\text{lb} } \newcommand{\inlb}[1]{#1~\text{in}\!\cdot\!\text{lb} } \newcommand{\lbperft}[1]{#1~\text{lb}/\text{ft} } \newcommand{\lbperin}[1]{#1~\text{lb}/\text{in} } \newcommand{\Nperm}[1]{#1~\text{N}/\text{m} } \newcommand{\kgperkm}[1]{#1~\text{kg}/\text{km} } \newcommand{\psinch}[1]{#1~\text{lb}/\text{in}^2 } \newcommand{\pqinch}[1]{#1~\text{lb}/\text{in}^3 } \newcommand{\psf}[1]{#1~\text{lb}/\text{ft}^2 } \newcommand{\pqf}[1]{#1~\text{lb}/\text{ft}^3 } \newcommand{\Nsm}[1]{#1~\text{N}/\text{m}^2 } \newcommand{\kgsm}[1]{#1~\text{kg}/\text{m}^2 } \newcommand{\kgqm}[1]{#1~\text{kg}/\text{m}^3 } \newcommand{\Pa}[1]{#1~\text{Pa} } \newcommand{\kPa}[1]{#1~\text{kPa} } \newcommand{\aSI}[1]{#1~\text{m}/\text{s}^2 } \newcommand{\aUS}[1]{#1~\text{ft}/\text{s}^2 } \newcommand{\unit}[1]{#1~\text{unit} } \newcommand{\ang}[1]{#1^\circ } \newcommand{\second}[1]{#1~\text{s} } \newcommand{\lt}{<} \newcommand{\gt}{>} \newcommand{\amp}{&} \)

In this chapter you will conduct static analysis of multi-body structures. Broadly defined, a structure is any set of interconnected rigid bodies designed to serve a purpose. The parts of the structure may move relative to one another, like the blades of scissors, or they may be fixed relative to one another, like the structural members of bridge.

Analysis of structures involves determining all forces acting on and between individual members of the structure. Fundamentally there is nothing new here; the techniques you have already learned apply, however structures tend to have more unknown forces, and so are more involved and provide more opportunities for error than the problems you have previously encountered. Correct free-body diagrams and careful work are required, as always.

6.1: Structures
6.2: Interactions between members
6.3: Trusses
In this section we will analyze a simplified approximation of a planar truss, called a simple truss and determine the forces the members individually support when the truss supports a load. Two different approaches will be presented: the method of sections, and the method of joints.
6.4: Method of Joints
6.5: Method of Sections
6.6: Frames and Machines
6.7: Summary
6.8: Exercises

This page titled 6: Equilibrium of Structures was last modified on Sun, 15 Aug 2021 06:45:15 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by Daniel W. Baker and William Haynes (Engineeringstatics) via source content that was edited to the style and standards of the LibreTexts platform.

Contents

Text