8.6: Questions

Laboratory Manual - DC Electrical Circuit Analysis · LibreTexts

0%

Contents

    Text

    Size
    100%
    Theme
    Typeface
    Line length
    Spacing

    From LibreTexts, under CC BY-NC-SA 4.0, as the source states it; its equations are written in TeX, which the PDF shows typeset. This page at LibreTexts.

    1. In Figure 8.3.1, if another pair of resistors was added across R6, would \(V_D\) go up, down, or stay the same? Why?

    2. In Figure 8.3.1, if R4 was accidentally opened would this change the potentials at B, C and D? Why or why not?

    3. If the DMM leads are reversed in Step 5, what happens to the measurements in Table 8.5.3?

    4. Suppose that R3 and R4 are accidentally swapped in Figure 8.3.2. What is the new \(V_{AB}\)?

    This page titled 8.6: Questions was last modified on Mon, 22 Mar 2021 03:01:02 GMT and is shared under a CC BY-NC-SA 4.0 license and was authored, remixed, and/or curated by James M. Fiore via source content that was edited to the style and standards of the LibreTexts platform.