# Recovered Clock Phase Monitoring on AMD Transceivers for Deterministic Timing

- Institution: CERN
- Speaker: Nikitas Loukas
- Year: 2026
- Language: English
- Source: [CERN](https://videos.cern.ch/record/3025786)
- Licence: [CERN](https://copyright.web.cern)
- Who can watch: Teens profiles and older (sources give no ratings; placed by Invisible Network from the source's own words)

After the Phase-II upgrade of the Large Hadron Collider at CERN, pile-up discrimination in the CMS Electromagnetic Barrel Calorimeter demands a clock system with picosecond precision and deterministic phase. Although modern electronics can achieve sub-5 ps RMS jitter, widely used FPGAs do not ensure phase repeatability after reset. Their Multi-Gigabit Transceivers prioritize bit error rate robustness over deterministic recovered clock phase. Measurements with the Barrel Calorimeter Processor (BCP-V2) show that MGT resets can yield two discrete recovered clock phases about 10 ps apart, while the internal Delay Aligner adds temperature-dependent drift. The BCP-V2 integrates a picosecond-resolution monitor achitecture that extracts the clock before the Delay Aligner and the FPGA fabric (RXRECCLKOUT) and compares it to RXUSRCLK, typically used as the LHC reference, using a Digital Dual Mixer Time Difference method, enabling real-time detection of clock phase jumps and drifts.

00:00:00 Slide 1

00:00:25 Slide 2

00:00:52 Slide 3

00:02:21 Slide 4

00:02:37 Slide 5

00:02:53 Slide 6

00:03:39 Slide 7

00:04:42 Slide 8

00:05:04 Slide 9

00:05:31 Slide 10

00:06:01 Slide 11

00:06:51 Slide 12

00:07:18 Slide 13

00:07:49 Slide 14

00:08:20 Slide 15

00:09:05 Slide 16

00:09:37 Slide 17

00:10:41 Slide 18

00:12:01 Slide 19

00:14:44 Slide 20

00:15:59 Slide 21

00:16:55 Slide 22

00:19:06 Slide 23

## Lectures

1. [Recovered Clock Phase Monitoring on AMD Transceivers for Deterministic Timing](https://invisiblenetwork.ai/learn/cern/3025786/b9e4c5d8739e), 22 min (CERN's player)