# RT magnet design, fabrication, testing III

- Institution: CERN
- Department: CAS - CERN Accelerator School
- Speaker: Attilio Milanese
- Year: 2023
- Level: Graduate
- Language: English
- Subjects: Art, architecture and design
- Source: [CERN](https://videos.cern.ch/record/3012683)
- Licence: [CERN](https://copyright.web.cern)
- Who can watch: Tweens profiles and older (sources give no ratings; placed by Invisible Network from the source's own words)

This course focuses on resistive magnets. After an introduction, with examples of the variety of normal conducting magnets installed in accelerators, the main requirements and interfaces are formalized and described. The design principles – both of the yoke and of the coil – are then presented, with general formulae and covering more in detail the case of dipoles and quadrupoles. The last part is dedicated to fabrication and acceptance tests, where real life examples are provided.

0:00:00 Slide 1

0:01:34 Slide 2

0:02:39 Slide 3

0:05:58 Slide 4

0:08:05 Slide 5

0:09:41 Slide 6

0:13:06 Slide 7

0:14:18 Slide 8

0:16:26 Slide 9

0:19:09 Slide 10

0:21:58 Slide 11

0:23:10 Slide 12

0:25:44 Slide 13

0:27:04 Slide 14

0:28:16 Slide 15

0:31:00 Slide 16

0:35:12 Slide 17

0:48:06 Slide 18

0:50:43 Slide 19

0:52:43 Slide 20

0:56:08 Slide 21

0:57:10 Slide 22

## Lectures

1. [RT magnet design, fabrication, testing III](https://invisiblenetwork.ai/learn/cern/3012683/3512b95e57bf), 59 min (CERN's player)